DEPENDENCIES

For the base system you only need cmake and build-essential (make, gcc, some unix tools).

To build documentation you need doxygen, graphviz and ronn.

To build pdf documentation you need pdflatex with

    texlive-fonts-recommended
    texlive-latex-recommended
    texlive-latex-extra

For the debian package, please refer to debian/control (in the debian branch).

For the plugins, please refer to the README.md of the respective plugin.

PREPARATION

Elektra uses cmake. Tested are cmake version 2.8.9 and version 3.0.2.

To configure Elektra graphically (with curses) run (.. belongs to command):

    mkdir build && cd build && ccmake ..

and press 'c':

All options described here, can also be used with cmake rather than ccmake (.. belongs to the command!):

    mkdir build && cd build && cmake -D<OPTION1>=<VAR1> -D<OPTION2>=<VAR2> ..

For information what you can use as OPTION1 and OPTION2 see above. Note to pass "" to VAR if it contains ;. E.g.:

    cmake -DPLUGINS="dump;resolver;yajl" ..

Some scripts in the folder of the same name may help you running cmake.

COMPILERS

For supported compilers see the automatic build farm on http://build.libelektra.org:8080/

Additional gcc 4.6 armhf is tested regularly.

Compiler	Version	Target
gcc	gcc (Debian 4.7.2-5) 4.7.2	i386
gcc	gcc (Debian 4.7.2-5) 4.7.2	amd64
gcc	gcc 4.8	amd64
gcc	gcc 4.9	amd64
gcc	(Debian 4.4.5-8) 4.4.5	amd64
gcc	(Debian 4.4.5-8) 4.3	amd64
gcc	4.6	armhf
mingw	4.6	i386
clang	version 3.5.0-1~exp1	x86_64-pc-linux-gnu
icc	14.0.2 20140120	x86_64-pc-linux-gnu

To change the compiler, use

    CMAKE_C_COMPILER and CMAKE_CXX_COMPILER.

for example to use gcc-4.3

    cmake -DCMAKE_C_COMPILER=gcc-4.3 -DCMAKE_CXX_COMPILER=g++-4.3 ..

OPTIONS

Some options, i.e. PLUGINS, BINDINGS and TOOLS are either:

a list of elements separated with ; (note that shells typically need ; to be escaped)
a special uppercase element that gets replaced by a list of elements, that are:
- ALL to include all elements (except elements with unfulfilled dependencies)
- NODEP to include all elements without dependencies
- DEFAULT to go back to the situation that was there when nothing was changed
elements prefixed with a minus symbol (-) to exclude an element

Examples for this are especially in the subsection PLUGINS below, but they work in the same fashion for BINDINGS and TOOLS.

PLUGINS

Read about available plugins here.

Because the core of elektra is minimal, plugins are needed to actually read and write to configuration files (storage plugins), commit the changes (resolver plugin, also takes care about how the configuration files are named) and also do many other tasks related to configuration.

The default is also the minimal set of plugins you should add:

dump is the default storage. If you remove it, make sure you add another one and set KDB_DEFAULT_STORAGE to it.
resolver is the default resolver. If you remove it, make sure you add another one and set KDB_DEFAULT_RESOLVER to it.
sync is very useful to not lose any data. If you do not want to include it, make sure to set /sw/elektra/kdb/#0/current/plugins to a value not containing sync (e.g. an empty value). See kdb-mount(1).

To add all plugins, you can use:

    -DPLUGINS=ALL

Note that plugins get dropped when dependencies are not satisfied. To add all plugins except some plugins you can use:

    -DPLUGINS="ALL;-plugin1;-plugin2"

E.g. if you want all plugins except the jni plugin you would use:

    -DPLUGINS="ALL;-jni"

To add all plugins not having additional dependencies (they need only POSIX), you can use

    -DPLUGINS=NODEP

To manually set the default (same as not setting PLUGINS), you can use

    -DPLUGINS=DEFAULT

This only states the list of the plugins are the default list and does not mean that a different default is used after Elektra was installed. For this endeavour you need to change:

    -DKDB_DEFAULT_RESOLVER=resolver

and

    -DKDB_DEFAULT_STORAGE=dump

The default resolver+storage will write to KDB_DB_FILE and KDB_DB_INIT (for bootstrapping).

!!! Note, that you cannot use NODEP or DEFAULT and add other plugins to it. Instead, you can pass the list of plugins you want, e.g.:

    -DPLUGINS="resolver;sync;dump"

Some plugins are compile-time configureable. Then you can choose which features are compiled in or out. This is especially important in the bootstrapping phase, because then only the compiled in configuration applies. To compile-time-configure a plugin, you just pass a underscore (_) and flags after the name of the plugin.

The resolver distinguish between 3 different kind of flags:

    -DPLUGINS="resolver_baseflags_userflags_systemflags"

Following baseflags are available:

'c' for debugging conflicts
'f' for enabling file locking
'm' for enabling mutex locking

The user flags are (the order matters!):

'p' use passwd/ldap to lookup home directory using getpwuid_r
'h' use the environment variable HOME
'u' use the environment variable USER
'b' use the built-in default CMAKE variable KDB_DB_HOME

The system flags are (the order matters!):

if a path that begins with / is chosen the system flags are irrelevant and the path is taken as-is.
'x' use the environment variable XDG_CONFIG_DIRS (: are interpreted as part of filename, no searching is done!) This option is not recommended (unless for testing), because it allows users to fake system configuration.
'b' use the built-in default CMAKE variable KDB_DB_SYSTEM

E.g. one may use:

    -DPLUGINS="resolver;resolver_lm_uhpb_b"

!!! Note, that the base-plugin itself need to be part of PLUGINS, so that the variants will work, e.g., to add resolver_l_h_b you need to specify

    -DPLUGINS="resolver;resolver_l_h_b"

even if you actually do not want to have resolver. You can add resolver with any combination of the flags, even if they are not available in ALL.

TOOLS

Tools are used to add extra functionality to Elektra. The flag used to specify which tools are compiled is -DTOOLS, thus flag works similarly to the -DPLUGINS flag.

To add all tools, you can use::

    -DTOOLS=ALL

To add all plugins not having additional dependencies (they need only POSIX), you can use:

    -DTOOLS=NODEP

To build only the default tools, you can use:

    -DTOOLS=DEFAULT

To specify specific tools you can use, e.g.:

    -DTOOLS=qt-gui;kdb

BINDINGS

Bindings are used in the same way as PLUGINS and TOOLS. For example you can use:

    -DBINDINGS=ALL

Note that the same languages are sometimes available over GI and SWIG. In this case, the SWIG bindings are preferred. To add all swig bindings (and also cpp), you can use:

    -DBINDINGS=SWIG;cpp

The SWIG executable my be specified with:

    -DSWIG_EXECUTABLE=...

If this option is not used, cmake will find the first occurrence of swig in your environment's path.

CMAKE_BUILD_TYPE

Debug, Release or RelWithDebInfo See help bar at bottom of ccmake for that option or: http://www.cmake.org/Wiki/CMake_Useful_Variables

ELEKTRA_DEBUG_BUILD and ELEKTRA_VERBOSE_BUILD

Only needed by Elektra developers. Make the library to output logging information. It is not recommended to use these options.

BUILD_DOCUMENTATION

build documentation with doxygen the kdb tool does only have the integrated docu at the moment

CMAKE_INSTALL_PREFIX

By default all files will installed below /usr/local. Edit that cache entry to change that behaviour. Also called system prefix within the documentation.

If you want to create a package afterwards it is ok to use paths that you can write to (e.g. CMAKE_INSTALL_PREFIX /home/markus/bin)

LIB_SUFFIX

Lets you install libraries into architecture specific folder. E.g. for 32/64 bit systems you might install libraries under lib64. Set LIB_SUFFIX to 64 to achieve exactly that. So the system library folder will be CMAKE_INSTALL_PREFIX/lib64 then.

TARGET_INCLUDE_FOLDER

By default include folders will be installed below CMAKE_INSTALL_PREFIX/include/elektra This entry let you change the elektra. If the entry is empty, the include files will be installed directly to CMAKE_INSTALL_PREFIX/include.

TARGET_PLUGIN_FOLDER

Similar to above, but with the plugins. Default is: CMAKE_INSTALL_PREFIX/lib${LIB_SUFFIX}/elektra It can be also left empty to install plugins next to other libraries.

GTEST_ROOT

Specifies the root of the GoogleTest sources, to be used for some of the tests. A CMakeLists.txt inside GTEST_ROOT will be searched as way to detect a valid GoogleTest source directory. If it is "", an internal version of gtest will be used.

It is recommended that you browse through all of the options. Afterwards press c again (maybe multiple times until all variables are resolved) and then g to generate. Finally press e to exit.

INSTALL_BUILD_TOOLS

Specifies that the build tools, i.e. elektra-export-symbols and elektra-export-symbols are installed (by default off). Is needed for cross-compilation.

BUILDING

NO IDE

To build the source use:

make

You can pass: -j for parallel builds VERBOSE=1 to see the invocations of the compiler

CodeBlocks

You can build Elektra using Code::Blocks under Gentoo:

Precondition: Make sure you have a compiler, xml2 (for kdb tool) and xsl (see later) installed. cmake configure will help you with that, it will make sure you don't forget something essential.

For Most Linux system all you have to do is open up a console and

    mkdir build
    cd build
    cmake .. -G 'CodeBlocks - Unix Makefiles'
    make package

Note 1: You can use other editor if you like just type cmake at the console to get a list of option you can pass to cmake as long as well as a list of what code editor project cmake can create.

Note 2: For Unix if you have nCurses install you can run ccmake to set important option after running cmake like to enable debug symbol.

Note 3: for Gentoo is recommend to emerge sys-apps/lsb-release to name the package right even thou not required.