|
Elektra
0.8.21
|
For an introduction, please read first about elektra classes. You might want to read about architecture first.
Data structures define the common layer in Elektra. They are used to transfer configuration between Elektra and applications, but also between plugins.
Both the KeySet and the interface to metadata within a Key are actually ADT (abstract data types). The API is designed so that different implementations of the data structures can be used internally.
A hash data structure presents a good candidate as alternative data structure, especially for the metadata interface. It is believed to be much faster on lookup, but considerably slower on sorted enumeration.
An AVL tree also serves as a competitor. AVL trees are expected to be faster for inserting keys at any place, but may be slower for appending because of the needed reorganizations. Their disadvantage is that they need to allocate a large number of small pieces of memory. Further investigations, namely implementation and benchmarks, are required to decide.
A trie could also be used for lookup of key names. It performs well for lookup, but needs more memory allocations.
Currently the KeySet is implemented as a sorted array. It is fast on appending and iterating, and has nearly no size-overhead. To improve the lookup-time, an additional hash will be used.
Application binary interface, or ABI, is the interface to all data structures of an application or library directly allocated or accessed by the user.
Special care has been taken in Elektra to support all changes within the data structures without any ABI changes. ABI changes would entail the recompilation of applications and plugins using Elektra. The functions keyNew(), ksNew() and kdbOpen() allocate the data structures for the applications. The user only gets pointers to them. It is not possible for the user to allocate or access these data structures directly when only using the public header file <kdb.h>. The functions keyDel(), ksDel() and kdbClose() free the resources after use. Using the C++ binding deallocation is done automatically.
Read here.
This subsection describes what has changed between 0.7 and 0.8 and deals with some general implementation issues.
KeySet resembles the classical mathematical set. Operations like union, intersection or difference are well defined. In mathematics typically every operation yields a new set. Instead, we try to reuse sets in the following ways:
A completely new and independent KeySet as return value would resemble the mathematical ideal closely. This operation would be expensive. Every Key needs to be duplicated and inserted into a new KeySet.
Such a deep duplication was only needed in kdbSet().
The resulting KeySet is created during the operation, but only a flat copy is made. This means that the keys in it are actually not duplicated, but only their reference counter is increased. This method is similar to the mathematical model. Compared with a deep copy it can achieve good performance. But all changes to the values of keys in the resulting KeySet affect the original KeySet, too.
ksDup(const KeySet *source) produces a new KeySet. That way the source is not changed as shown by the const modifier.
The result of the operation is applied to the KeySet passed as argument directly. This is actually quite common, but for this situation other names of the operations are more suitable.
For example, a union which changes the KeySet is called ksAppend().
A new KeySet is created, but the KeySet passed as parameter is reduced by the keys needed for the new KeySet. This is useful in situations where many operations have to be applied in a sequence reducing the given KeySet until no more keys are left. None of the reference pointers change in this situation.
ksCut(KeySet *ks, const Key *cutpoint) works that way. All keys below the cutpoint are moved from ks to the returned key set.
There are several ways to define consistency relations on key sets. For strict consistency every parent key must exist before the user can append a key to a key set. For example, the key set with the keys
system
system/elektra
system/elektra/mountpoints
would allow the key system/elektra/mountpoints/tcl to be added, but not the key system/apps/abc because system/apps is missing. File systems enforce this kind of consistency.
These semantics are however not useful for configurations. Especially for user configurations often only some keys need to be overwritten. It is not a good idea to copy all parent keys to the users configuration. For this reason we use a less strict definition of consistency supporting such holes.
We also evaluated a form of weak consistency. It avoids adding some unnecessary keys. A constraint is that a key can be added only if it has a parent key. But the constraint does not apply if no other key exists above the key about to be inserted. From that moment it will serve as parent key for other keys. With the current implementation of KeySet, however, it is not possible to decide this constraint in constant time. Instead its worst-case complexity would be $log(n) * x$ where $n$ is the number of keys currently in the key set and $x$ is the depth of the key. The depth is the number of / in the key name. The worst-case of the complexity applies when the inserting works without a parent key. For example, with the keys
user/sw/apps/abc/current/bindings
user/sw/apps/abc/current/bindings/key1
user/sw/apps/abc/current/bindings/key2
the weak consistency would allow inserting user/sw/apps/abc/current/bindings/key3 because it is directly below an existing key. It would also allow adding user/sw/apps/xyz/current because it does not have any parent key. But it would not allow user/sw/apps/abc/current/bindings/dir/key1 to add. The worst-case complexity was found to be too expensive, and hence KeySet has no consistency check at all.
This means any key with a valid key name can be inserted into KeySet. The KeySet is changed so that it is now impossible to append keys without a name. ksAppendKey(ks, Key *toAppend) takes ownership of the key toAppend and will delete the key in that case. The caller does not have to free toAppend: either it is in the key set or it is deleted.
Binary search determines the position where to insert a key. The C version of binary search bsearch() cannot tell where to insert a key when it is not found. So the algorithm has to be reimplemented. Java's binary search binarySearch() uses a trick to both indicate where a key is found and where to insert it with the same return code by returning the negative value ((-insertion point) - 1) indicating where the new value should be inserted when the key is not found. Elektra now also uses this trick internally.
KeySet supports an external iterator with the two functions ksRewind() to go to the beginning and ksNext() to advance the internal cursor to the next key. This side effect is used to indicate a position for operations on a KeySet without any additional parameter. This technique is comfortable to see which key has caused an error after an unsuccessful key database operation.
Elektra only has some functions to change the cursor of a key set. But these allow the user to compose powerful functions. Plugins do that extensively as we will see later in ksLookupRE(). The user can additionally write more such functions for his or her own purposes. To change the internal cursor, it is sufficient to iterate over the KeySet and stop at the wanted key. With this technique, we can, for example, realize lookup by value, by specific metadata and by parts of the name. Without an additional index, it is not possible that such operations perform more efficiently than by a linear iteration key by key. For that reason, Elektra’s core does not provide such functions. The function ksLookupByName(), however, uses the more efficient binary search because the array inside the KeySet is ordered by name.
External cursor is an alternative to the approach explained above. Elektra provides a limited external cursor through the interface ksGetCursor() and ksSetCursor(). It is not possible to advance this cursor. The difference to the internal cursor is that the position is not stored within KeySet.
We considered providing an external cursor for performance reasons. But we found out that the speed of iteration is mainly limited because of safety checks. The investigated methods become slower proportional to the ease of use and safety. When using null pointers and range checks, the function is noticeably slower than without. With the same amount of checks, using an external cursor is not much faster than ksNext(). External cursor with checks is in a benchmark about 10% faster.
But an external cursor directly accessing the array can be much faster. Using an unchecked external cursor can be about 50% faster than using the internal cursor with ksNext(). For this endeavour, Elektra’s private header files need to be included. Including private header files, however, should not be done with levity because ABI compatibility will be gone on any changes of the data structures. This fact means the application or plugin needs to be recompiled when any of the internal structures of Elektra are changed. We strongly discourage including these header files.
Nevertheless, the overall performance impact for iteration is minimal and should not matter too much. Even if only a single keySetMeta() is used inside the iteration loop, the iteration costs are insignificant. Only for trivial actions such as just changing a variable, counter or marker for every key the iteration costs become the lion's share. In such situations an internal iterator yields better results. For example, ksForEach() applies a user defined function for every key in a KeySet without having null pointer or out of range problems.
Up to now, we have discussed external data structures visible to the user of the library. The application and plugin programmer needs them to access configuration. Last, but not least, we will show two internal data structures. The user will not see them. To understand the algorithm, however, the user needs to understand them as well.
A Trie or prefix tree is an ordered tree data structure. In Elektra, it provides the information to decide in which backend a key resides. The algorithm, presented in algorithm, also needs a list of all backends. The initial approach was to iterate over the Trie to get a list of all backends. But the transformation of a Trie to a list of backends, contained many bugs caused by corner cases in connection with the default backend and cascading mountpoints.
So, instead of transforming the trie to a list of backends, we introduced a new data structure called Split. The name Split comes from the fact that an initial key set is split into many key sets. These key sets are stored in the Split object. Split advanced to the central data structure for the algorithm:
typedef struct _Split Split;
struct _Split {
size_t size;
size_t alloc;
KeySet **keysets;
Backend **handles;
Key **parents;
int *syncbits;
};
The data structure Split contains the following fields:
Split.parentKey contains the root key of a backend. No key of the respective key set is above the parentKey. The key name of parentKey contains the mountpoint of a backend. The resolver writes the file name into the value of the parentKey.syncbits to decide if the key set needs to be synchronized.Continue reading with the error handling.
All structs are defined in opmphm.h.
The OPMPHM is a randomized hash map of the Las Vegas type, that creates an index over the elements, to gain O(1) access.
The OPMPHM represent an arbitrary index over your elements arranged in an array. The desired index of an element, also known as the order is set in OpmphmGraph->edges[i].order. Where i is the i-th element in your array. Since you can assign arbitrary values as the order, the array of your elements can have gaps and even have equal orders for two different elements. Those orders must be specified before inserting all elements in the OPMPHM, also known as build.
Once the OPMPHM is build, every:
leads to an invalid OPMPHM and forces a rebuild.
The OPMPHM maps each element to an edge in an random acyclic r-uniform r-partite hypergraph. In a r-uniform r-partite hypergraph each edge connects r vertices, each vertex in a different component. The probability of being acyclic and time until such an acyclic r-uniform r-partite hypergraph is found depends on the the following variables:
r: The r variable defines the number of components in the random r-uniform r-partite hypergraph. Use the opmphmOptR (n) function to get an optimal value for your number of elements (n).c: The c variable defines the number of vertices in each component of the random r-uniform r-partite hypergraph. The number of vertices in one component is defined as (c * n / r) + 1, where n is the number of elements and r is the variable from above. The c variable must have a minimal value to ensure a success probability, use the opmphmMinC (r) function, with your r from above. The ensure a optimal time until success increment the c variable with the value from the opmphmOptC (n) function, where n is the number of elements.Use opmphmNew () and opmphmGraphNew (...) to instantiate the needed structures. The function opmphmGraphNew (...) takes r and c as parameter. Use the opmphmOptR (...) function to get your r value, use this r also to get your c value the following way:
c = opmphmMinC (r) + opmphmOptC (n)
To initialize the OPMPHM build the OpmphmInit must be set with information about your data. Set your data array OpmphmInit->data and the element name extraction function OpmphmInit->getName, which should extract the string from a single data array entry. Provide a good seed in OpmphmInit->initSeed, needed in the next step.
The function opmphmMapping uses your seed (the OpmphmInit->seed will be changed) and tries to construct the random acyclic r-uniform r-partite hypergraph, this might not succeed, on cycles just call it again.
The opmphmAssignment () function assigns either your order (set at OpmphmGraph->edges[i].order) or a default order. The default order is the order of OpmphmInit->data. The defaultOrder parameter indicates the behavior. When the OPMPHM is build with the default order, OpmphmGraph->edges[i].order must not be set.
After the build the OpmphmInit and OpmphmGraph should be freed. The OPMPHM is now ready for constant lookups with the opmphmLookup ().
Once build, follow the steps from the build, just omit the opmphmNew () invocation.
1.8.13