- infos = Information about the yamlcpp plugin is in keys below
- infos/author = René Schwaiger sanssecours@me.com
- infos/licence = BSD
- infos/needs = base64 directoryvalue
- infos/provides = storage/yaml
- infos/recommends =
- infos/placements = getstorage setstorage
- infos/status = maintained unittest preview unfinished concept discouraged
- infos/metadata =
- infos/description = This storage plugin reads and writes data in the YAML format
YAML CPP
Introduction
The YAML CPP plugin reads and writes configuration data via the yaml-cpp library.
Usage
You can mount this plugin via kdb mount:
. To unmount the plugin use kdb umount:
. The following examples show how you can store and retrieve data via yamlcpp.
`` <h1>Mount yamlcpp plugin to cascading namespace/examples/yamlcpp` sudo kdb mount config.yaml /examples/yamlcpp yamlcpp
Manually add a mapping to the database
echo "🔑 : 🐳" > kdb file /examples/yamlcpp
Retrieve the value of the manually added key
kdb get /examples/yamlcpp/🔑 #> 🐳
Manually add syntactically incorrect data
echo "some key: @some value" >> kdb file /examples/yamlcpp kdb get "/examples/yamlcpp/some key"
STDERR: .*yaml-cpp: error at line 2, column 11: unknown token.*
ERROR: 10
RET: 5
Overwrite incorrect data
echo "🔑: value" > kdb file /examples/yamlcpp
Add some values via kdb set
kdb set /examples/yamlcpp 🎵 kdb set /examples/yamlcpp/fleetwood mac kdb set /examples/yamlcpp/the chain
Retrieve the new values
kdb get /examples/yamlcpp #> 🎵 kdb get /examples/yamlcpp/the #> chain kdb get /examples/yamlcpp/fleetwood #> mac
Undo modifications
kdb rm -r /examples/yamlcpp sudo kdb umount /examples/yamlcpp
Mount yamlcpp plugin to cascading namespace /examples/yamlcpp
sudo kdb mount config.yaml /examples/yamlcpp yamlcpp
Manually add an array to the database
echo 'sunny:' > kdb file /examples/yamlcpp echo ' - Charlie' >> kdb file /examples/yamlcpp echo ' - Dee' >> kdb file /examples/yamlcpp
List the array entries
kdb ls /examples/yamlcpp #> user/examples/yamlcpp/sunny #> user/examples/yamlcpp/sunny/#0 #> user/examples/yamlcpp/sunny/#1
Read an array entry
kdb get user/examples/yamlcpp/sunny/#1 #> Dee
You can retrieve the last index of an array by reading the metakey array
kdb getmeta /examples/yamlcpp/sunny array
1
Extend the array
kdb set user/examples/yamlcpp/sunny/#2 Dennis kdb set user/examples/yamlcpp/sunny/#3 Frank kdb set user/examples/yamlcpp/sunny/#4 Mac
Retrieve the last array entry
kdb get user/examples/yamlcpp/sunny/$(kdb getmeta user/examples/yamlcpp/sunny array) #> Mac
Undo modifications to the key database
kdb rm -r /examples/yamlcpp sudo kdb umount /examples/yamlcpp
Mount yamlcpp plugin to cascading namespace /examples/yamlcpp
sudo kdb mount config.yaml /examples/yamlcpp yamlcpp
Add some key value pairs
kdb set /examples/yamlcpp/key value kdb set /examples/yamlcpp/array/#0 scalar kdb set /examples/yamlcpp/array/#1/key value kdb set /examples/yamlcpp/array/#1/🔑 🙈
kdb ls /examples/yamlcpp #> user/examples/yamlcpp/array #> user/examples/yamlcpp/array/#0 #> user/examples/yamlcpp/array/#1 #> user/examples/yamlcpp/array/#1/key #> user/examples/yamlcpp/array/#1/🔑 #> user/examples/yamlcpp/key
Retrieve part of an array value
kdb get /examples/yamlcpp/array/#1/key #> value
Since an array saves a list of values, an array parent
- which represent the array - does not store a value!
echo "/examples/yamlcpp/array: “`kdb get /examples/yamlcpp/array`”" #> /examples/yamlcpp/array: “” kdb get /examples/yamlcpp/array/#1 echo "/examples/yamlcpp/array/#1: “`kdb get /examples/yamlcpp/array/#1`”" #> /examples/yamlcpp/array/#1: “”
Remove part of an array value
kdb rm /examples/yamlcpp/array/#1/key
kdb ls /examples/yamlcpp #> user/examples/yamlcpp/array #> user/examples/yamlcpp/array/#0 #> user/examples/yamlcpp/array/#1 #> user/examples/yamlcpp/array/#1/🔑 #> user/examples/yamlcpp/key
The plugin stores array keys using YAML sequences.
Since yaml-cpp stores keys in arbitrary order -
either key or array could be the “first” key -
we remove key before we retrieve the data. This way
we make sure that the output below will always look
the same.
kdb rm /examples/yamlcpp/key kdb file /examples/yamlcpp | xargs cat #> array: #> - scalar #> - 🔑: 🙈
Undo modifications to the key database
kdb rm -r /examples/yamlcpp sudo kdb umount /examples/yamlcpp
. As we can see above the value containing metadata is marked by the tag handle !elektra/meta. The data type contains a list with two elements. The first element of this list specifies the value of the key, while the second element contains a map saving the metadata for the key. The data above represents the following key set in Elektra if we mount the file directly to the namespace user:
| Name | Value | Metaname | Metavalue |
|---|---|---|---|
| user/key without metadata | value1 | — | — |
| user/key with metadata | value2 | metakey | metavalue |
| empty metakey | — | ||
| another metakey | another metavalue |
. The example below shows how we can read and write metadata using the yamlcpp plugin via kdb.
`` <h1>Mount yamlcpp plugin to cascading namespace/examples/yamlcpp` sudo kdb mount config.yaml user/examples/yamlcpp yamlcpp
Manually add a key including metadata to the database
echo "🔑: !elektra/meta [🦄, {comment: Unicorn}]" > kdb file user/examples/yamlcpp kdb lsmeta user/examples/yamlcpp/🔑 #> comment kdb getmeta user/examples/yamlcpp/🔑 comment #> Unicorn
Add a new key and add some metadata to the new key
kdb set user/examples/yamlcpp/brand new kdb setmeta user/examples/yamlcpp/brand comment "The Devil And God Are Raging Inside Me" kdb setmeta user/examples/yamlcpp/brand rationale "Because I Love It"
Retrieve metadata
kdb lsmeta user/examples/yamlcpp/brand #> comment #> rationale kdb getmeta user/examples/yamlcpp/brand rationale #> Because I Love It
Undo modifications to the key database
kdb rm -r user/examples/yamlcpp sudo kdb umount user/examples/yamlcpp
sudo kdb mount config.yaml /examples/yamlcpp yamlcpp type kdb set /examples/yamlcpp/typetest/number 21 kdb setmeta /examples/yamlcpp/typetest/number check/type short
kdb set /examples/yamlcpp/typetest/number "One"
RET: 5
STDERR: .*The type short failed to match for .*/number with string: One.*
ERROR: 52
kdb get /examples/yamlcpp/typetest/number #> 21
Undo modifications to the key database
kdb rm -r /examples/yamlcpp sudo kdb umount /examples/yamlcpp
Mount YAML CPP plugin at cascading namespace /examples/binary
sudo kdb mount test.yaml /examples/binary yamlcpp
Manually add binary data
echo 'bin: !!binary aGk=' > kdb file /examples/binary
Base 64 decodes the data aGk= to hi and stores the value in binary form.
The command kdb get prints the data as hexadecimal byte values.
kdb get /examples/binary/bin #>
We can use bash to convert the hexadecimal value returned by kdb get
to its ASCII representation.
bash -c 'printf kdb get /examples/binary/bin' #> hi
Add a string value to the database
kdb set /examples/binary/text mate
Base 64 does not modify textual values
kdb get /examples/binary/text #> mate
The Base 64 plugin re-encodes binary data before YAML CPP stores the key set. Hence the
configuration file contains the value aGk= even after YAML CPP wrote a new configuration.
grep -q 'bin: !.* aGk=' kdb file user/examples/binary
RET: 0
Undo modifications to the database
kdb rm -r /examples/binary sudo kdb umount /examples/binary
stores all of the values (🍂, leaf and 🍁) in the leaves of the mapping. The drawing below makes this situation a little bit clearer.
The key set that this plugin creates using the data above looks like this (assuming we mount the plugin to user/examples/yamlcpp):
| Name | Value |
|---|---|
| user/examples/yamlcpp/level | |
| user/examples/yamlcpp/level 1/level 2 | |
| user/examples/yamlcpp/level 1/level 2/level 3 | 🍁 |
| user/examples/yamlcpp/root | |
| user/examples/yamlcpp/root/below root | leaf |
| user/examples/yamlcpp/root/subtree | 🍂 |
. Now why is this plugin unable to store values outside leaf nodes? For example, why can we not store a value inside user/examples/yamlcpp/level 1/level 2? To answer this question we need to look at the YAML representation:
. In a naive approach we might just try to add a value e.g. 🙈 right next to level 2:
. This however would be not correct, since then the YAML node level 2 would contain both a scalar value (🙈) and a mapping ({ level 3: 🍁 }). We could solve this dilemma using a list:
. However, if we use this approach we are not able to support Elektra’s array type properly.
Directory Values
To overcome the limitation described above, the YAML CPP plugin requires the Directory Value plugin. This plugin converts the value of a non-leaf node to a leaf node with the name ___dirdata. For example, let us assume we have the following key set:
. The Directory Value plugin will convert the key set in the set (write) direction to
. Consequently the YAML plugin will store the key set as
. A user of the YAML plugin will not notice this feature unless he edits the configuration file by hand, as the following example shows:
`` <h1>Mount YAML CPP plugin atuser/examples/yamlcpp` sudo kdb mount test.yaml user/examples/yamlcpp yamlcpp
kdb set user/examples/yamlcpp/directory 'Directory Data' kdb setmeta user/examples/yamlcpp/directory comment 'Directory Metadata' kdb set user/examples/yamlcpp/directory/file 'Leaf Data'
kdb ls user/examples/yamlcpp/directory #> user/examples/yamlcpp/directory #> user/examples/yamlcpp/directory/file
kdb get user/examples/yamlcpp/directory #> Directory Data kdb getmeta user/examples/yamlcpp/directory comment #> Directory Metadata kdb get user/examples/yamlcpp/directory/file #> Leaf Data
Undo modifications to the database
kdb rm -r user/examples/yamlcpp sudo kdb umount user/examples/yamlcpp
kdb mount default.yaml / yamlcpp ```
all tests should work correctly. The problem here is that Elektra does not load additional required plugins (infos/needs) for a default storage plugin.
