|
Elektra
0.9.2
|
The following table shows a summary of the results of a benchmark_storage run: NOTE: factor is always dump / quickdump (bigger = quickdump is faster), this test was only run with version 1, see below for a comparison of with version 2
| operation | dump (µs) | quickdump (µs) | factor |
|---|---|---|---|
| write keyset | 81661 | 4741 | 17.224 |
| read keyset | 94782 | 44673 | 2.122 |
| iterate keyset | 125 | 135 | 0.926 |
| delete keyset | 1823 | 3518 | 0.518 |
| re-read keyset | 92939 | 43749 | 2.124 |
| strcmp key name | 609 | 1826 | 0.334 |
| strcmp key value | 684 | 761 | 0.899 |
A script was used to generate KeySets with 2, 200, 2,000, 200,000 and 2,000,000 Keys. For keynames we used increasing numbers (prefixed with _ to keep correct order), each key had a randomized value of 15 characters. Additionally we added 4 metakeys to each key. The names and values of these were created similarly.
The parent key used was dir/tests/bench.
We then used hyperfine to compare the performance of dump and quickdump.
This means we used the same key sets for each of the runs, but the key values shouldn't really matter. It also means that no shared metadata (keyCopyMeta) was involved.
We also used a modified version of benchmark_plugingetset that returned after the get call, to test the get performance by itself. Because set doesn't scale linearly because of the checks for keyCopyMeta, the largest KeySet was only used for the get only version. (The test was aborted after the initial run of dump took longer than all the runs for quickdump together.)
The complete results can be found in this repository and the files used for these benchmarks are quite big and can be found in another separate repository.
For reference in the file size tests below, here is a list of the raw data sizes of the keysets. These sizes are calculated as the sum of: 1) length of all keynames 2) length of all key values 3) length of all metakeys 4) length of all meta values All lengths include a null terminator, sizes are calculated once with (WP) and once without the parent key (WOP).
| no. of keys | raw size WP (B) | raw size WOP (B) |
|---|---|---|
| 2 | 252 | 220 |
| 200 | 25784 | 22584 |
| 2000 | 262786 | 229786 |
| 200000 | 26977790 | 23777790 |
| 20000000 | 273777792 | 241777792 |
factor is dump / quickdump like above (bigger = quickdump has smaller files)
| no. of keys | dump (B) | quickdump (B) | factor |
|---|---|---|---|
| 2 | 430 | 412 | 1.04 |
| 200 | 41206 | 40988 | 1.01 |
| 2000 | 415807 | 413788 | 1.00 |
| 200000 | 42377809 | 42177788 | 1.00 |
| 2000000 | 427777810 | 425777788 | 1.00 |
The values are mean ± standard deviation. factor is dump / quickdump like above
| no. of keys | dump (s) | quickdump (s) | factor |
|---|---|---|---|
| 2 | 0.0016 ± 0.0003 | 0.0006 ± 0.0001 | 2.67 |
| 200 | 0.0091 ± 0.0009 | 0.0018 ± 0.0000 | 5.06 |
| 2000 | 0.0770 ± 0.0030 | 0.0127 ± 0.0008 | 6.06 |
| 200000 | 10.7876 ± 4.2564 | 1.2640 ± 0.0061 | 8.53 |
The values are mean ± standard deviation. factor is dump / quickdump like above
| no. of keys | dump (s) | quickdump (s) | factor |
|---|---|---|---|
| 2 | 0.0014 ± 0.0000 | 0.0005 ± 0.0000 | 2.8 |
| 200 | 0.0032 ± 0.0005 | 0.0013 ± 0.0002 | 2.46 |
| 2000 | 0.0179 ± 0.0002 | 0.0086 ± 0.0008 | 2.08 |
| 200000 | 1.6830 ± 0.0222 | 0.8515 ± 0.0048 | 1.98 |
| 2000000 | 17.1814 ± 0.2201 | 8.8808 ± 0.0344 | 1.93 |
Running the same benchmark_plugingetset tests with version 2 of the plugin yields:
factor is v1 / v2 like above (bigger is better)
| no. of keys | quickdump v1 (B) | quickdump v2 (B) | factor |
|---|---|---|---|
| 2 | 412 | 380 | 1.08 |
| 200 | 40988 | 23788 | 1.72 |
| 2000 | 413788 | 381788 | 1.08 |
| 200000 | 42177788 | 38977788 | 1.08 |
| 2000000 | 425777788 | 393777788 | 1.08 |
The values are mean ± standard deviation. factor is v1 / v2, i.e. bigger is better
| no. of keys | quickdump v1 (s) | quickdump v2 (s) | factor |
|---|---|---|---|
| 2 | 0.0006 ± 0.0001 | 0.0013 ± 0.0035 | 0.47 |
| 200 | 0.0018 ± 0.0000 | 0.0018 ± 0.0002 | 1.02 |
| 2000 | 0.0127 ± 0.0008 | 0.0112 ± 0.0021 | 1.13 |
| 200000 | 1.2640 ± 0.0061 | 1.2602 ± 0.0372 | 1.00 |
| 2000000 | - | 13.2104 ± 0.1185 | - |
The values are mean ± standard deviation. factor is v1 / v2 like above
| no. of keys | quickdump v1 (s) | quickdump v2 (s) | factor |
|---|---|---|---|
| 2 | 0.0005 ± 0.0000 | 0.0006 ± 0.0001 | 0.88 |
| 200 | 0.0014 ± 0.0002 | 0.0010 ± 0.0001 | 1.33 |
| 2000 | 0.0086 ± 0.0008 | 0.0072 ± 0.0005 | 1.20 |
| 200000 | 0.8516 ± 0.0048 | 0.6413 ± 0.0082 | 1.33 |
| 2000000 | 8.8809 ± 0.0345 | 6.3756 ± 0.0443 | 1.39 |
Running the same benchmark_plugingetset tests with version 3 of the plugin yields:
factor is v1 / v2 like above (bigger is better)
| no. of keys | quickdump v2 (B) | quickdump v3 (B) | factor |
|---|---|---|---|
| 2 | 380 | 240 | 1.58 |
| 200 | 23788 | 23788 | 1.00 |
| 2000 | 381788 | 241788 | 1.58 |
| 200000 | 38977788 | 24977788 | 1.56 |
| 2000000 | 393777788 | 253777788 | 1.55 |
The values are mean ± standard deviation. factor is v2 / v3, i.e. bigger is better
| no. of keys | quickdump v2 (s) | quickdump v3 (s) | factor |
|---|---|---|---|
| 2 | 0.0013 ± 0.0035 | 0.0012 ± 0.0029 | 1.08 |
| 200 | 0.0018 ± 0.0002 | 0.0017 ± 0.0002 | 1.05 |
| 2000 | 0.0112 ± 0.0021 | 0.0106 ± 0.0011 | 1.06 |
| 200000 | 1.2602 ± 0.0372 | 1.1473 ± 0.0287 | 1.10 |
| 2000000 | 13.2104 ± 0.1185 | 11.5082 ± 0.2624 | 1.15 |
The values are mean ± standard deviation. factor is v2 / v3 like above
| no. of keys | quickdump v2 (s) | quickdump v3 (s) | factor |
|---|---|---|---|
| 2 | 0.0006 ± 0.0001 | 0.0006 ± 0.0001 | 0.99 |
| 200 | 0.0010 ± 0.0001 | 0.0012 ± 0.0001 | 0.84 |
| 2000 | 0.0072 ± 0.0005 | 0.0070 ± 0.0004 | 1.03 |
| 200000 | 0.6413 ± 0.0082 | 0.6288 ± 0.0218 | 1.02 |
| 2000000 | 6.3756 ± 0.0443 | 6.2309 ± 0.0462 | 1.02 |
1.8.17