|
Elektra
0.9.3
|
The spec plugin is a global plugin that copies metadata from the spec-namespace to other namespaces using their key names as globbing expressions. Globbing resembles regular expressions. They do not have the same expressive power, but are easier to use. The semantics are more suitable to match path names:
* matches any key name of just one hierarchy. This means it complies with any character except slash or null.? satisfies single characters with the same exclusion.# matches Elektra array elements. (e.g. #0, #_10, #__987)_ matches anything that * matches, except array elements.elektraKeyGlob().The plugin copies the metadata of the corresponding spec key to every matching (see below) key in the other namespaces. The copied metadata is removed again during kdbSet (if remained unchanged).
The spec plugin also provides basic validation and structural checking. Specifically it supports:
_The matching of the spec (globbing) keys to the keys in the other namespaces is based on elektraKeyGlob(), which in turn is based on the well known fnmatch(3). However, there is special handling for array specifications (#) and wildcard specifications (_).
Keys which contain a part that is exactly # (e.g. my/#/key or my/#) are called array specifications. Instead of just matching the spec key to any existing keys in other namespaces, theses keys are "instantiated". This means we lookup the array size (defined by the array metakey) using a cascading ksLookup. This only looks at non-spec namespaces, if we don't find an array size their, we check the array parent in the spec namespace. If we still have no array size, the array is deemed to be empty. For empty arrays, we will simply validate that they are indeed empty.
For non-empty arrays "instantiation" takes place. This means that we replace each # part in the spec key by all the valid array elements for this specification, up to the array size (which was already checked to be less than the allowed maximum). In other words, instead of actually matching the globbing expression, we create a separate but identical specification for all valid array elements.
The purpose of "instantiation" is to allow specifying default values for array elements.
Keys which contain a part that is exactly _ (e.g. my/_/key or my/_) are called wildcard specifications. It would be nice to have an "instantiation" procedure for _ similar to the one for arrays. However, this is not possible with the current implementation, since there is no way of knowing in advance, which keys matching the globbing expression may be requested via ksLookup.
Instead _ is simply treated like * during matching. Afterwards we check that no array elements were matched.
The basic functionality of the plugin is to just copy (using keyCopyMeta() so we don't waste memory) the metadata of spec keys to all matching (as described above) keys in other namespaces. This ensures that other plugins can do their work as expected, without manually setting metadata on every key. If any metakey we want to copy already exists on the target key (with a different value), this causes a collision conflict.
In addition to the basic functionality, the plugin does some validation itself.
If a spec key has the metakey default set and the key does not exist in other namespaces, we create a special (cascading) key that will be found by ksLookup. This key has the default value as its value. We also copy over metadata as always.
A similar procedure takes place for assign/condition, but in this case, we don't set the value of the key. We only create it and copy metadata.
If a spec key has the metakey require (the value of this metakey is irrelevant and ignored), we ensure that this key exists in at least one other namespace, i.e. it can be found using a cascading ksLookup. If the key cannot be found, this causes a missing conflict.
As hinted to above, we validate array sizes. If a spec key x/# is given, and the spec key x has the metakey array/min or array/max set, we validate the array size (given as metakey array on x) is within the limits of array/min and array/max. Both array/min and array/max have to be valid array-elements similar to array. If the array size is out of bounds, this causes a range conflict.
We also check that the array only contains actual array elements. If this not the case, this causes a member conflict.
Note: We don't actually validate that the array doesn't contain elements above the given array size. This is because it doesn't have anything to do with the specification, whether the array contains additional elements. Note also that we only copy metadata onto elements within the bounds of the array size.
There are various ways in which a conflict can occur during the validation process. To handle these conflicts, we provide various configuration options.
The possible conflicts are:
member: an invalid array key has been detected. e.g. /#abc, or /x (i.e. non-array-element) if array (#) was specifiedrange: the array has more or less elements than specified by the array/min and array/max metakeys.missing: the key marked as required wasn't found.invalid: the specification or a key was invalidcollision: the metakey that's supposed to be added already exists.To define what actions should be taken on on conflicts during kdbGet and kdbSet respectively use the keys conflict/set and conflict/get in the plugin configuration.
This base configuration can be overridden on a per-conflict basis to provide more granularity. The keys for this are (replace _ with get or set accordingly):
For even more granularity, the above per-conflict metakeys can also be specified on individual keys.
The allowed values for the conflict keys are always the same:
ERROR yields an error when a conflict occursWARNING adds a warning when a conflict occursINFO adds a metakey logs/spec/info to the parent-key which can be used by logging plugins. logs/spec/info is an array, each element is one conflict.There is also the special key missing/log. If it is set to 1, the plugin will create the meta array logs/spec/missing/#. This array will contain a list of the missing keys. The key missing/log can only be part of the main plugin configuration, not individual keys' metakeys. It also applies to kdbGet and kdbSet calls.
Ini files can be found in /examples/spec which should be PWD so that the example works:
With spec mount one can use (in this case battery.ini needs to be installed in kdb file spec (this should be preferred on non-development machines so that everything still works after the source is removed):
kdbSet, if the corresponding spec key was modified.require do not emit errors even if not present (https://issues.libelektra.org/1024)
1.8.13