Elektra  0.9.5
Plugin: toml

Introduction

This plugin is a storage plugin for reading and writing TOML files. The plugin retains most of the file structure of a read TOML file such as comments, empty lines and TOML tables. It supports all kinds of TOML specific types and tables, including nested inline tables and multiline strings.

Requirements

The plugin needs Flex (>=2.6.2) and Bison (>=3) for parsing TOML files.

Types

Reading

On reading, the plugin will set the type metakey for strings, integers, floats and boolean values, if applicable. For decimal integers, the metakey is set to long_long. For binary/octal/hexadecimal integers, the metakey is set to unsigned_long_long. For floats, the metakey will be set to double. These types are chosen to conform with the TOML format as stated on the offical TOML page.

On reading, non-decimal integers will get converted to decimal. The non-decimal representation will be stored in the origvalue metakey of the key. When writing a key, the value of that metakey will be written instead, in order to retain the original format. Note that the origvalue metakey gets removed if the value of the key changes.

``` sudo kdb mount test.toml user:/tests/storage/types toml type

Create a TOML file with 4 keys

echo 'plain_decimal = 1000' >> kdb file user:/tests/storage/types echo 'file_permissions = 0o777' >> kdb file user:/tests/storage/types echo 'pi = 3.1415' >> kdb file user:/tests/storage/types echo 'division_gone_wrong = -inf' >> kdb file user:/tests/storage/types

Print the content of the toml file

cat kdb file user:/tests/storage/types

> plain_decimal = 1000

> file_permissions = 0o777

> pi = 3.1415

> division_gone_wrong = -inf

Print types and values of the keys with `kdb`

kdb meta-get 'user:/tests/storage/types/plain_decimal' 'type'

> long_long

kdb get 'user:/tests/storage/types/plain_decimal'

> 1000

kdb meta-get 'user:/tests/storage/types/file_permissions' 'type'

> unsigned_long_long

The octal value will be converted to decimal

kdb get 'user:/tests/storage/types/file_permissions'

> 511

kdb meta-get 'user:/tests/storage/types/pi' 'type'

> double

kdb get 'user:/tests/storage/types/pi'

> 3.1415

kdb meta-get 'user:/tests/storage/types/division_gone_wrong' 'type'

> double

kdb get 'user:/tests/storage/types/division_gone_wrong'

> -inf

Cleanup

kdb rm -r user:/tests/storage/types sudo kdb umount user:/tests/storage/types

## Writing
On writing, for most values, the plugin will infer the appropriate type and will write them accordingly.
This means, values, that match a TOML float, integer or date will be written without any quotes around them.
If a value does not match any of these types, it will be written as a string.
The plugin uses an existing `type` metakey only to check if it should write a value as a `string` or a `boolean`.
With this functionality, numbers can be written as a string to the file, if wanted.
To write a boolean value, the `type` metakey must be set to `boolean` for the key.
Otherwise, no conversion to the TOML boolean values will take place.
Per default, Elektra uses 0/1 to represent boolean values.

sudo kdb mount test.toml user:/tests/storage/types toml type

Create a key, which may be a integer, boolean or string

kdb set 'user:/tests/storage/types/value' '1'

The plugin infers `long_long` for this value

kdb meta-get 'user:/tests/storage/types/value' 'type'

> long_long

The value is written as an integer

cat kdb file user:/tests/storage/types

> value = 1

Manually set the `type` metakey to boolean

kdb meta-set 'user:/tests/storage/types/value' 'type' 'boolean'

The value is written as a boolean

cat kdb file user:/tests/storage/types

> value = true

Manually set the `type` metakey to string

kdb meta-set 'user:/tests/storage/types/value' 'type' 'string'

The value is written as a string

cat kdb file user:/tests/storage/types

> value = "1"

Cleanup

kdb rm -r user:/tests/storage/types sudo kdb umount user:/tests/storage/types

# Numbers
The plugin supports reading and writing of any kind of number supported by the TOML format, such as floating point numbers and binary/octal/decimal/hexadecimal integers.
To write a non-decimal integer, add the corresponding prefix to the number (`0b` for binary, `0o` for octal, `0x` for hexadecimal).
The value will be written in the given base to the file, but converted to decimal within Elektra (see [Reading](##reading)).
Note that the plugin doesn't warn about invalid prefix/digit combinations. If the combination is not valid, it will be written as a string instead.
If the `type` plugin is enabled and you want to change the value of an existing number key which needs conversion (all keys which have a `origvalue`),
you have to change the value of `origvalue` instead of the key value. Otherwise the `type` plugin will give an error.

Mount a new TOML file

sudo kdb mount test.toml user:/tests/storage/numbers toml type

Write an octal value

kdb set 'user:/tests/storage/numbers/a' '0o777'

Get the converted decimal value

kdb get 'user:/tests/storage/numbers/a'

> 511

Get the original octal value

kdb meta-get 'user:/tests/storage/numbers/a' 'origvalue'

> 0o777

Get the type of the number; since it's originally octal, we get `unsigned_long_long`

kdb meta-get 'user:/tests/storage/numbers/a' 'type'

> unsigned_long_long

Change the value by changing the `origvalue` metakey

kdb meta-set 'user:/tests/storage/numbers/a' 'origvalue' '0o666'

Get the new value as decimal

kdb get 'user:/tests/storage/numbers/a'

> 438

Change the value to an invalid octal value.

kdb meta-set 'user:/tests/storage/numbers/a' 'origvalue' '0o888'

The key value is no longer considered a number

kdb meta-get 'user:/tests/storage/numbers/a' 'type'

> string

Cleanup

kdb rm -r user:/tests/storage/numbers sudo kdb umount user:/tests/storage/numbers

# Strings
The plugin can read any kind of TOML string: bare, basic, literal, basic multiline and literal multiline.
However, it will write back all non-bare strings as basic strings or it's multiline version.
Therefore, any string set with `kdb set` must be treated as a basic string and possible escape sequences and special meanings of quotation characters must be taken care of.

Mount TOML file

sudo kdb mount test_strings.toml user:/tests/storage toml type

setting a string containing a newline escape sequence

kdb set 'user:/tests/storage/string' 'I am a basic string a literal one.'

kdb get 'user:/tests/storage/string'

> I am a basic string

> ot a literal one

setting the string again, but escape the backslash with another backslash

kdb set 'user:/tests/storage/string' 'I am a basic string\not a literal one.'

kdb get 'user:/tests/storage/string'

> I am a basic string\not a literal one

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

The plugin supports all kinds of escape sequences used by TOML in basic and basic multiline strings, like `\n`, `\r`, `\t` and
even `\u`/`\U` for Unicode escape sequences. `\t` is interpreted to be 4 spaces.
# Binary/NULL values
The plugin handles binary values by using the [base64](@ref src_plugins_base64_README_md) plugin.
As a result, binary values get written as base64 encoded strings, which start with the special prefix `@BASE64`.
`NULL` key values are written as special strings of value `@NULL`.

Mount TOML file

sudo kdb mount test_binary.toml user:/tests/storage toml type

Creating a key with a NULL value

kdb set 'user:/tests/storage/nullkey'

> Create a new key user:/test/nullkey with null value

Print file content

cat kdb file user:/tests/storage

> nullkey = '@NULL'

Write base64 encoded data to the file

echo "base64 = '@BASE64SSBhbSBiYXNlIDY0IGVuY29kZWQgZm9yIG5vIHJlYXNvbi4='" > kdb file user:/test

Print the value of the key, which is a binary value

kdb get 'user:/test/base64' #>

Print the value again, but apply the escape codes

echo -e kdb get 'user:/test/base64' #> I am base 64 encoded for no reason.

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

# TOML specific structures
TOML specific structures are represented by the metakey `tomltype` on a certain key.
It will be set when the TOML plugin reads a TOML structure from a file. Additionally, this metakey can be set by the user, if they want a certain TOML structure to be written.
No automatic inference of this metakey is done on writing.
## Simple Tables
TOML's simple tables are represented by setting the `tomltype` metakey to `simpletable`.

Mount TOML file

sudo kdb mount test_table.toml user:/tests/storage toml type

Create three keys, which are all a subkey of 'common',

but we have no 'common' simple table key yet

kdb set 'user:/tests/storage/common/a' '0' kdb set 'user:/tests/storage/common/b' '1' kdb set 'user:/tests/storage/common/c' '2'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> common.a = 0 #> common.b = 1 #> common.c = 2

Create a simple table key

kdb meta-set 'user:/tests/storage/common' 'tomltype' 'simpletable'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> [common] #> a = 0 #> b = 1 #> c = 2

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

## Table Arrays
Table arrays are represented by setting the `tomltype` metakey to `tablearray`. It is not required to also set the array metakey, since the plugin will set the metakey, if it is missing.

Mount TOML file

sudo kdb mount test_table_array.toml user:/tests/storage toml type

Create a table array containing two entries, each with a key 'a' and 'b'

kdb meta-set 'user:/tests/storage/tablearray' 'tomltype' 'tablearray' kdb set 'user:/tests/storage/tablearray/#0/a' '1' kdb set 'user:/tests/storage/tablearray/#0/b' '2'

kdb set 'user:/tests/storage/tablearray/#1/a' '3' kdb set 'user:/tests/storage/tablearray/#1/b' '4'

Print the highest index of the table array

kdb meta-get 'user:/tests/storage/tablearray' 'array' #> #1

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> [[tablearray]] #> a = 1 #> b = 2 #> [[tablearray]] #> a = 3 #> b = 4

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

## Inline Tables
Inline tables are represented by setting the `tomltype` metakey to `inlinetable`. The plugin also supports reading/writing nested inline tables.

Mount TOML file

sudo kdb mount test_inline_table.toml user:/tests/storage toml type

Create a table array containing two entries, each with a key 'a' and 'b'

kdb meta-set 'user:/tests/storage/inlinetable' 'tomltype' 'inlinetable' kdb set 'user:/tests/storage/inlinetable/a' '1' kdb set 'user:/tests/storage/inlinetable/b' '2' kdb meta-set 'user:/tests/storage/inlinetable/nested' 'tomltype' 'inlinetable' kdb set 'user:/tests/storage/inlinetable/nested/x' '3' kdb set 'user:/tests/storage/inlinetable/nested/y' '4'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> inlinetable = { a = 1, b = 2, nested = { x = 3, y = 4 } }

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

## Arrays
Arrays are recognized by the `array` metakey. On writing, the plugin will detect arrays automatically and set the appropriate metakey if it is missing.

Mount TOML file

sudo kdb mount test_array.toml user:/tests/storage toml type

Create array elements

kdb set 'user:/tests/storage/array/#0' '1' kdb set 'user:/tests/storage/array/#1' '2' kdb set 'user:/tests/storage/array/#2' '3'

Print the highest index of the array

kdb meta-get 'user:/tests/storage/array' 'array' #> #2

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> array = [1, 2, 3]

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

# Comments and Empty Lines
The plugin preserves all comments with only one limitation for arrays. The amount of whitespace in front of a comment is also saved.
For this purpose, each tab will get translated to 4 spaces.
Comments can also be created by assigning meta keys to a key.
The meta keys must be of the form `comment/#n`, where `n` is a positive number, indicating the position of the comment relative to the key.
An index of 0 is always the inline comment of the key.
Indices greater than zero are for comments preceding the given key, where 1 is the top-most comment and the highest index comment is right above the key.
Spaces can be added to a comment by creating a `comment/#n/space` metakey with the amount of spaces to the key.
File ending comments must be assigned to the file root key.
Empty lines in front of a key can be created by adding an empty `comment/#n/start` entry to it. In this case, no `comment/#n` key is needed.

Mount TOML file

sudo kdb mount test_comments.toml user:/tests/storage toml type

create a key-value pair, ready for comment decoration

kdb set 'user:/tests/storage/key' '1'

add an inline comment with 4 leading spaces

kdb meta-set 'user:/tests/storage/key' 'comment/#0' ' This value is very interesting' kdb meta-set 'user:/tests/storage/key' 'comment/#0/space' '4'

add some comments preceding the key

kdb meta-set 'user:/tests/storage/key' 'comment/#1' ' I am the top-most comment relative to my key.' kdb meta-set 'user:/tests/storage/key' 'comment/#2' ' I am in the middle. Just boring.' kdb meta-set 'user:/tests/storage/key' 'comment/#3' ' I am in the line right above my key.'

add file ending comments and empty lines

kdb meta-set 'user:/tests/storage' 'comment/#1' ' First file-ending comment' kdb meta-set 'user:/tests/storage' 'comment/#2/start' '' kdb meta-set 'user:/tests/storage' 'comment/#3' ' Second file-ending comment. I am the last line of the file.'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> # I am the top-most comment relative to my key. #> # I am in the middle. Just boring. #> # I am in the line right above my key. #> key = 1 # This value is very interesting #> # First file-ending comment #> #> # Second file-ending comment. I am the last line of the file.

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

## Comments in Arrays
Any amount of comments can be placed between array elements or between the first element and the opening brackets.
However, only one comment - an inline comment - can be placed after the last element and the closing brackets.
On reading, the plugin discards any non-inline comments between the last element and the closing brackets.

Mount TOML file

sudo kdb mount test_array_comments.toml user:/tests/storage toml type

Create array elements

kdb set 'user:/tests/storage/array/#0' '1' kdb set 'user:/tests/storage/array/#1' '2' kdb set 'user:/tests/storage/array/#2' '3'

Add inline comment after the array

kdb meta-set 'user:/tests/storage/array' 'comment/#0' ' Inline comment after the array' kdb meta-set 'user:/tests/storage/array' 'comment/#0/start' '#' kdb meta-set 'user:/tests/storage/array' 'comment/#0/space' '5'

Add comments for array elements

kdb meta-set 'user:/tests/storage/array/#0' 'comment/#0' ' Inline comment of first element' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#0/start' '#' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#0/space' '4'

kdb meta-set 'user:/tests/storage/array/#0' 'comment/#1' ' Comment preceding the first element' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#1/start' '#' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#1/space' '4'

kdb meta-set 'user:/tests/storage/array/#0' 'comment/#2' ' Another comment preceding the first element' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#2/start' '#' kdb meta-set 'user:/tests/storage/array/#0' 'comment/#2/space' '6'

kdb meta-set 'user:/tests/storage/array/#1' 'comment/#0' ' Inline comment of second element' kdb meta-set 'user:/tests/storage/array/#1' 'comment/#0/start' '#' kdb meta-set 'user:/tests/storage/array/#1' 'comment/#0/space' '4'

kdb meta-set 'user:/tests/storage/array/#1' 'comment/#1' ' Comment preceding the second element' kdb meta-set 'user:/tests/storage/array/#1' 'comment/#1/start' '#' kdb meta-set 'user:/tests/storage/array/#1' 'comment/#1/space' '6'

kdb meta-set 'user:/tests/storage/array/#2' 'comment/#0' ' Inline comment of the last element' kdb meta-set 'user:/tests/storage/array/#2' 'comment/#0/start' '#' kdb meta-set 'user:/tests/storage/array/#2' 'comment/#0/space' '5'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> array = [ # Comment preceding the first element #> # Another comment preceding the first element #> 1, # Inline comment of first element #> # Comment preceding the second element #> 2, # Inline comment of second element #> 3 # Inline comment of the last element #> ] # Inline comment after the array

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage

# Order
The plugin preserves the file order by the usage of the metakey `order`. When reading a file, the order metakey will be set according to the order as read in the file.
If new keys are added, eg. via `kdb set`, the order of the set key will be set to the next-to-highest order value present in the existing key set.
However, the order is only relevant between elements with the same TOML-parent. For example keys of a simple table are only sorted with respect to each other, not with any keys outside that table. If that table has it's order changed and moves to another position in the file, so will it's subkeys.
When sorting elements under the same TOML-parent, tables (simple and array) will always be sorted after non-table elements, regardless of their order.
With this limitation, we prevent that a newly set key, that is not part of a certain table array/simple table, would be placed after the table declaration, making it a member of that table on a subsequent read.

Mount TOML file

sudo kdb mount test_order.toml user:/tests/storage toml type

Create three keys in reverse alphabetical order under the subkey common

Additionally, create one key not in the common subkey space

kdb set 'user:/tests/storage/common/c' '0' kdb set 'user:/tests/storage/common/b' '1' kdb set 'user:/tests/storage/common/a' '2' kdb set 'user:/tests/storage/d' '3'

Print the content of the resulting TOML file

The keys are ordered as they were set

cat kdb file user:/tests/storage #> common.c = 0 #> common.b = 1 #> common.a = 2 #> d = 3

Create a simple table for the three keys under `common`

kdb meta-set 'user:/tests/storage/common' 'tomltype' 'simpletable'

Print the content of the resulting TOML file

cat kdb file user:/tests/storage #> d = 3 #> [common] #> c = 0 #> b = 1 #> a = 2

Cleanup

kdb rm -r user:/tests/storage sudo kdb umount user:/tests/storage ```

In this example, d and common have the same parent, the file root. This means, they need to be sorted with each other. d would be placed before common by it's order, since it was set before, and thus, has lesser order. However, their order never gets compared, since common is a simple table and d is not, so d will get sorted before the table regardless of order.

Limitations

While the plugin has good capabilities in handling the TOML file format, it currently lacks some features possible with Elektra:

Additionally, there are some minor limitations related to the TOML file format, mostly related to the preservation of the original file structure:

Generated by   doxygen 1.8.13