Constructs a class KDB. More...

#include <kdb.hpp>

Inheritance diagram for kdb::KDB:

Public Member Functions
	KDB ()
	Constructs a class KDB. More...

	KDB (Key &errorKey)
	Constructs a class KDB. More...

	KDB (KeySet &contract)
	Constructs a class KDB. More...

	KDB (KeySet &contract, Key &errorKey)
	Constructs a class KDB. More...

virtual void	open (Key &errorKey)
	Open the database. More...

virtual void	open (KeySet &contract, Key &errorKey)
	Open the database. More...

virtual void	close () throw ()
	Close the database. More...

virtual void	close (Key &errorKey) throw ()
	Close the database. More...

virtual int	get (KeySet &returned, std::string const &keyname)
	Get all keys below keyname inside returned. More...

virtual int	get (KeySet &returned, Key &parentKey)
	Get all keys below parentKey inside returned. More...

virtual int	set (KeySet &returned, std::string const &keyname)
	Set all keys below keyname. More...

virtual int	set (KeySet &returned, Key &parentKey)
	Set all keys below parentKey. More...

Detailed Description

Constructs a class KDB.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

Access to the key database.

Invariant: the object holds a valid connection to the key database or is empty

Constructor & Destructor Documentation

◆ KDB() [1/4]

kdb::KDB::KDB ( )

inline

Constructs a class KDB.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [2/4]

kdb::KDB::KDB ( Key & errorKey )

inlineexplicit

Constructs a class KDB.

Parameters

errorKey is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [3/4]

kdb::KDB::KDB ( KeySet & contract )

inlineexplicit

Constructs a class KDB.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [4/4]

kdb::KDB::KDB	(	KeySet &	contract,
		Key &	errorKey
	)

inline

Constructs a class KDB.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

Member Function Documentation

◆ close() [1/2]

void kdb::KDB::close	(	)
throw	(
	)

inlinevirtual

Close the database.

The return value does not matter because its only a null pointer check.

Closes the session with the Key database.

Precondition: The handle must be a valid handle as returned from kdbOpen(); errorKey must be a valid key, e.g. created with keyNew()

This is the counterpart of kdbOpen().

You must call this method when you are finished working with the Key database. You can manipulate Key and KeySet objects also after kdbClose(), but you must not use any kdb*() call afterwards.

The handle parameter will be finalized and all resources associated to it will be freed. After a kdbClose(), the handle cannot be used anymore.

Parameters

handle	contains internal information of opened key database
errorKey	the key which holds error/warning information

Return values

0	on success
-1	on NULL pointer

Since: 1.0.0

See also: kdbOpen() for opening a session with a Key database

◆ close() [2/2]

void kdb::KDB::close	(	Key &	errorKey	)
throw	(
	)

inlinevirtual

Close the database.

The return value does not matter because its only a null pointer check.

Parameters

errorKey is useful if you want to get the warnings

Closes the session with the Key database.

Precondition: The handle must be a valid handle as returned from kdbOpen(); errorKey must be a valid key, e.g. created with keyNew()

This is the counterpart of kdbOpen().

You must call this method when you are finished working with the Key database. You can manipulate Key and KeySet objects also after kdbClose(), but you must not use any kdb*() call afterwards.

The handle parameter will be finalized and all resources associated to it will be freed. After a kdbClose(), the handle cannot be used anymore.

Parameters

handle	contains internal information of opened key database
errorKey	the key which holds error/warning information

Return values

0	on success
-1	on NULL pointer

Since: 1.0.0

See also: kdbOpen() for opening a session with a Key database

◆ get() [1/2]

int kdb::KDB::get	(	KeySet &	returned,
		Key &	parentKey
	)

inlinevirtual

Get all keys below parentKey inside returned.

Retrieve Keys from a Key database in an atomic and universal way.

Precondition: The handle must be passed as returned from kdbOpen().; The returned KeySet must be a valid KeySet, e.g. constructed with ksNew().; The parentKey Key must be a valid Key, e.g. constructed with keyNew().

If you pass NULL on any parameter, kdbGet() will fail immediately without doing anything.

The returned KeySet ks may already contain some keys, e.g. from previous kdbGet() calls. The newly retrieved Keys will be appended using ksAppendKey().

If not done earlier, kdbGet() will fully retrieve all keys under the parentKey folder recursively (See Optimization below when it will not be done). Cascading Keys (starting with /) will retrieve the same path in all namespaces. / will retrieve all Keys in handle.

Note: kdbGet() might retrieve more Keys than requested which are not below parentKey or even in a different namespace. These keys, except of proc:/ keys, must be passed to calls of kdbSet(), otherwise they will be lost. This stems from the fact that the user has the only copy of the whole configuration and backends only write configuration that was passed to them. For example, if you kdbGet() "system:/mountpoint/interest" you will not only get all Keys below system:/mountpoint/interest, but also all Keys below system:/mountpoint (if system:/mountpoint is a mountpoint as the name suggests, but system:/mountpoint/interest is not a mountpoint). Make sure to not touch or remove Keys outside the Keys of interest, because others may need them!

Example:: This example demonstrates the typical usecase within an application (without error handling).

 
#include <kdb.h>
#include <stdio.h>
 
int main (void)
{
        KeySet * myConfig = ksNew (0, KS_END);
 
        // for error handling see kdbget_error.c
 
        // clang-format off
Key * key = keyNew ("/sw/tests/myapp/#0/current/",  KEY_END);
KDB * handle = kdbOpen (NULL, key);
kdbGet (handle, myConfig, key);
Key * result = ksLookupByName (myConfig, "/sw/tests/myapp/#0/current/testkey1", 0);
        // clang-format on
 
        keyDel (key);
 
        const char * key_name = keyName (result);
        const char * key_value = keyString (result);
        const char * key_comment = keyString (keyGetMeta (result, "comment"));
        printf ("key: %s value: %s comment: %s\n", key_name, key_value, key_comment);
 
        ksDel (myConfig); // delete the in-memory configuration
 
 
        // maybe you want kdbSet() myConfig here
 
        kdbClose (handle, 0); // no more affairs with the key database.
}

When a backend fails kdbGet() will return -1 with all error and warning information in the parentKey. The parameter returned will not be changed.

Optimization:: In the first run of kdbGet all requested (or more) Keys are retrieved. On subsequent calls only the Keys are retrieved where something was changed inside the Key database. The other Keys stay in the KeySet returned as passed.

It is your responsibility to save the original KeySet if you need it afterwards.

If you want to be sure to get a fresh KeySet again, you need to open a second handle to the Key database using kdbOpen().

Parameters

handle	contains internal information of opened key database
parentKey	Keys below `parentKey` will be retrieved from `handle` It is also used to add warnings and set error information.
ks	the (pre-initialized) KeySet returned with all keys found will not be changed on error or if no update is required

Return values

1	if the Keys were retrieved successfully
0	if there was no update - no changes are made to the KeySet then
-1	on failure - no changes are made to the KeySet then

Since: 1.0.0

See also: ksLookup(), ksLookupByName() for powerful lookups after the KeySet was retrieved; kdbOpen() which needs to be called before; kdbSet() to save the configuration afterwards; kdbClose() to finish affairs with the Key database.

Parameters

returned	the keyset where the keys will be in
parentKey	the parentKey of returned

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Exceptions

KDBException if there were problems with the database

Reimplemented in kdb::tools::merging::MergingKDB.

◆ get() [2/2]

int kdb::KDB::get	(	KeySet &	returned,
		std::string const &	keyname
	)

inlinevirtual

Get all keys below keyname inside returned.

Retrieve Keys from a Key database in an atomic and universal way.

Precondition: The handle must be passed as returned from kdbOpen().; The returned KeySet must be a valid KeySet, e.g. constructed with ksNew().; The parentKey Key must be a valid Key, e.g. constructed with keyNew().

If you pass NULL on any parameter, kdbGet() will fail immediately without doing anything.

The returned KeySet ks may already contain some keys, e.g. from previous kdbGet() calls. The newly retrieved Keys will be appended using ksAppendKey().

If not done earlier, kdbGet() will fully retrieve all keys under the parentKey folder recursively (See Optimization below when it will not be done). Cascading Keys (starting with /) will retrieve the same path in all namespaces. / will retrieve all Keys in handle.

Note: kdbGet() might retrieve more Keys than requested which are not below parentKey or even in a different namespace. These keys, except of proc:/ keys, must be passed to calls of kdbSet(), otherwise they will be lost. This stems from the fact that the user has the only copy of the whole configuration and backends only write configuration that was passed to them. For example, if you kdbGet() "system:/mountpoint/interest" you will not only get all Keys below system:/mountpoint/interest, but also all Keys below system:/mountpoint (if system:/mountpoint is a mountpoint as the name suggests, but system:/mountpoint/interest is not a mountpoint). Make sure to not touch or remove Keys outside the Keys of interest, because others may need them!

Example:: This example demonstrates the typical usecase within an application (without error handling).

 
#include <kdb.h>
#include <stdio.h>
 
int main (void)
{
        KeySet * myConfig = ksNew (0, KS_END);
 
        // for error handling see kdbget_error.c
 
        // clang-format off
Key * key = keyNew ("/sw/tests/myapp/#0/current/",  KEY_END);
KDB * handle = kdbOpen (NULL, key);
kdbGet (handle, myConfig, key);
Key * result = ksLookupByName (myConfig, "/sw/tests/myapp/#0/current/testkey1", 0);
        // clang-format on
 
        keyDel (key);
 
        const char * key_name = keyName (result);
        const char * key_value = keyString (result);
        const char * key_comment = keyString (keyGetMeta (result, "comment"));
        printf ("key: %s value: %s comment: %s\n", key_name, key_value, key_comment);
 
        ksDel (myConfig); // delete the in-memory configuration
 
 
        // maybe you want kdbSet() myConfig here
 
        kdbClose (handle, 0); // no more affairs with the key database.
}

When a backend fails kdbGet() will return -1 with all error and warning information in the parentKey. The parameter returned will not be changed.

Optimization:: In the first run of kdbGet all requested (or more) Keys are retrieved. On subsequent calls only the Keys are retrieved where something was changed inside the Key database. The other Keys stay in the KeySet returned as passed.

It is your responsibility to save the original KeySet if you need it afterwards.

If you want to be sure to get a fresh KeySet again, you need to open a second handle to the Key database using kdbOpen().

Parameters

handle	contains internal information of opened key database
parentKey	Keys below `parentKey` will be retrieved from `handle` It is also used to add warnings and set error information.
ks	the (pre-initialized) KeySet returned with all keys found will not be changed on error or if no update is required

Return values

1	if the Keys were retrieved successfully
0	if there was no update - no changes are made to the KeySet then
-1	on failure - no changes are made to the KeySet then

Since: 1.0.0

See also: ksLookup(), ksLookupByName() for powerful lookups after the KeySet was retrieved; kdbOpen() which needs to be called before; kdbSet() to save the configuration afterwards; kdbClose() to finish affairs with the Key database.

 
#include <kdb.hpp>
 
#include <keyio.hpp>
 
using namespace kdb;
 
int main ()
{
        KeySet config;
        KDB kdb;
        kdb.get (config, "/sw/MyApp");
 
        Key k = config.lookup ("/sw/MyApp/mykey");
        if (k)
        {
                std::cout << k << " is " << k.get<int> () << std::endl;
        }
        else
        {
                std::cerr << "No key found" << std::endl;
                return 1;
        }
}

Parameters

returned	the keyset where the keys will be in
keyname	the root keyname which should be used to get keys below it

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Exceptions

KDBException if there were problems with the database

See also: KDB::get (KeySet & returned, Key & parentKey)

Reimplemented in kdb::tools::merging::MergingKDB.

◆ open() [1/2]

void kdb::KDB::open ( Key & errorKey )

inlinevirtual

Open the database.

Parameters

errorKey is useful if you want to get the warnings in the successful case, when no exception is thrown.

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ open() [2/2]

void kdb::KDB::open	(	KeySet &	contract,
		Key &	errorKey
	)

inlinevirtual

Open the database.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ set() [1/2]

int kdb::KDB::set	(	KeySet &	returned,
		Key &	parentKey
	)

inlinevirtual

Set all keys below parentKey.

If the keyname of the parentKey is invalid (e.g. empty) all keys will be set.

Set Keys to a Key database in an atomic and universal way.

Precondition

kdbGet() must be called before kdbSet():

initially (after kdbOpen())
after conflict errors in kdbSet().

The returned KeySet must be a valid KeySet, e.g. constructed with ksNew().

The parentKey Key must be a valid Key, e.g. constructed with keyNew(). It must not have read-only name, value or metadata.

If you pass NULL on any parameter, kdbSet() will fail immediately without doing anything.

With parentKey you can specify which part of the given keyset is of interest for you. Then you promise to only modify or remove keys below this key. All others would be passed back as they were retrieved by kdbGet(). Cascading keys (starting with /) will set the path in all namespaces. / will commit all keys. Meta-names in parentKey will be rejected (error C01320). Empty/Invalid Keys will also be rejected (error C01320).

Errors

If parentKey == NULL or parentKey has read-only metadata, kdbSet() will immediately return the error code -1. In all other error cases the following happens:

kdbSet() will leave the KeySet's * internal cursor on the key that generated the error.
Error information will be written into the metadata of the parent key, if possible.
None of the keys are actually committed in this situation, i.e. no configuration file will be modified.

In case of errors you should present the error message to the user and let the user decide what to do. Possible solutions are:

remove the problematic key and use kdbSet() again (for validation or type errors)
change the value of the problematic key and use kdbSet() again (for validation errors)
do a kdbGet() (for conflicts, i.e. error C02000) and then
- set the same keyset again (in favour of what was set by this user)
- drop the old keyset (in favour of what was set from another application)
- merge the original, your own and the other keyset
export the configuration into a file (for unresolvable errors)
repeat the same kdbSet might be of limited use if the user does not explicitly request it, because temporary errors are rare and its unlikely that they fix themselves (e.g. disc full, permission problems)

Optimization: Each key is checked with keyNeedSync() before being actually committed. If no key of a backend needs to be synced any affairs to backends are omitted and 0 is returned.

KeySet * myConfig = ksNew (0, KS_END);
Key * parentKey = keyNew ("system:/sw/MyApp", KEY_END);
KDB * handle = kdbOpen (NULL, parentKey);
 
kdbGet (handle, myConfig, parentKey); // kdbGet needs to be called first!
KeySet * base = ksDup (myConfig);     // save a copy of original keyset
 
// change the keys within myConfig
ksAppendKey (myConfig, keyNew ("system:/sw/MyApp/Test", KEY_VALUE, "5", KEY_END));
 
KeySet * ours = ksDup (myConfig); // save a copy of our keyset
KeySet * theirs;                  // needed for 3-way merging
int ret = kdbSet (handle, myConfig, parentKey);
while (ret == -1) // as long as we have an error
{
        int strategy = showElektraErrorDialog (parentKey);
        theirs = ksDup (ours);
        kdbGet (handle, theirs, parentKey); // refresh key database
        KeySet * result = elektraMerge(
                ksCut(ours, parentKey), parentKey,
                ksCut(theirs, parentKey), parentKey,
                ksCut(base, parentKey), parentKey,
                parentKey, strategy, parentKey);
        int numberOfConflicts = getConflicts (parentKey);
        ksDel (theirs);
        if (result != NULL) {
                ret = kdbSet (handle, result, parentKey);
        } else {
                // an error happened while merging
                if (numberOfConflicts > 0 && strategy == MERGE_STRATEGY_ABORT)
                {
                        // Error due to merge conflicts
                        ret = -1;
                }
                else
                {
                        // Internal errors, out of memory etc.
                        ret = -1;
                }
        }
}
 
 
ksDel (ours);
ksDel (base);
ksDel (myConfig); // delete the in-memory configuration
 
kdbClose (handle, parentKey); // no more affairs with the key database.
keyDel (parentKey);

showElektraErrorDialog() and doElektraMerge() need to be implemented by the user of Elektra. For doElektraMerge a 3-way merge algorithm exists in libelektra-tools.

Parameters

handle	contains internal information of opened key database
ks	a KeySet which should contain changed keys, otherwise nothing is done
parentKey	Keys below `parentKey` will be set to `handle`. It is also used to add warnings and set error information.

Return values

1	on success
0	if nothing had to be done, no changes in KDB
-1	on failure, no changes in KDB, an error will be set on `parentKey` if possible (see "Errors" above)

Since: 1.0.0

See also: kdbOpen() for getting handle; kdbClose() that must be called afterwards; ksCurrent() contains the error Key

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Parameters

returned	the keyset where the keys are passed to the user
parentKey	the parentKey of returned

Exceptions

KDBException if there were problems with the database

◆ set() [2/2]

int kdb::KDB::set	(	KeySet &	returned,
		std::string const &	keyname
	)

inlinevirtual

Set all keys below keyname.

If the keyname of the parentKey is invalid (e.g. empty) all keys will be set.

Set Keys to a Key database in an atomic and universal way.

Precondition

kdbGet() must be called before kdbSet():

initially (after kdbOpen())
after conflict errors in kdbSet().

The returned KeySet must be a valid KeySet, e.g. constructed with ksNew().

The parentKey Key must be a valid Key, e.g. constructed with keyNew(). It must not have read-only name, value or metadata.

If you pass NULL on any parameter, kdbSet() will fail immediately without doing anything.

With parentKey you can specify which part of the given keyset is of interest for you. Then you promise to only modify or remove keys below this key. All others would be passed back as they were retrieved by kdbGet(). Cascading keys (starting with /) will set the path in all namespaces. / will commit all keys. Meta-names in parentKey will be rejected (error C01320). Empty/Invalid Keys will also be rejected (error C01320).

Errors

If parentKey == NULL or parentKey has read-only metadata, kdbSet() will immediately return the error code -1. In all other error cases the following happens:

kdbSet() will leave the KeySet's * internal cursor on the key that generated the error.
Error information will be written into the metadata of the parent key, if possible.
None of the keys are actually committed in this situation, i.e. no configuration file will be modified.

In case of errors you should present the error message to the user and let the user decide what to do. Possible solutions are:

remove the problematic key and use kdbSet() again (for validation or type errors)
change the value of the problematic key and use kdbSet() again (for validation errors)
do a kdbGet() (for conflicts, i.e. error C02000) and then
- set the same keyset again (in favour of what was set by this user)
- drop the old keyset (in favour of what was set from another application)
- merge the original, your own and the other keyset
export the configuration into a file (for unresolvable errors)
repeat the same kdbSet might be of limited use if the user does not explicitly request it, because temporary errors are rare and its unlikely that they fix themselves (e.g. disc full, permission problems)

Optimization: Each key is checked with keyNeedSync() before being actually committed. If no key of a backend needs to be synced any affairs to backends are omitted and 0 is returned.

KeySet * myConfig = ksNew (0, KS_END);
Key * parentKey = keyNew ("system:/sw/MyApp", KEY_END);
KDB * handle = kdbOpen (NULL, parentKey);
 
kdbGet (handle, myConfig, parentKey); // kdbGet needs to be called first!
KeySet * base = ksDup (myConfig);     // save a copy of original keyset
 
// change the keys within myConfig
ksAppendKey (myConfig, keyNew ("system:/sw/MyApp/Test", KEY_VALUE, "5", KEY_END));
 
KeySet * ours = ksDup (myConfig); // save a copy of our keyset
KeySet * theirs;                  // needed for 3-way merging
int ret = kdbSet (handle, myConfig, parentKey);
while (ret == -1) // as long as we have an error
{
        int strategy = showElektraErrorDialog (parentKey);
        theirs = ksDup (ours);
        kdbGet (handle, theirs, parentKey); // refresh key database
        KeySet * result = elektraMerge(
                ksCut(ours, parentKey), parentKey,
                ksCut(theirs, parentKey), parentKey,
                ksCut(base, parentKey), parentKey,
                parentKey, strategy, parentKey);
        int numberOfConflicts = getConflicts (parentKey);
        ksDel (theirs);
        if (result != NULL) {
                ret = kdbSet (handle, result, parentKey);
        } else {
                // an error happened while merging
                if (numberOfConflicts > 0 && strategy == MERGE_STRATEGY_ABORT)
                {
                        // Error due to merge conflicts
                        ret = -1;
                }
                else
                {
                        // Internal errors, out of memory etc.
                        ret = -1;
                }
        }
}
 
 
ksDel (ours);
ksDel (base);
ksDel (myConfig); // delete the in-memory configuration
 
kdbClose (handle, parentKey); // no more affairs with the key database.
keyDel (parentKey);

showElektraErrorDialog() and doElektraMerge() need to be implemented by the user of Elektra. For doElektraMerge a 3-way merge algorithm exists in libelektra-tools.

Parameters

handle	contains internal information of opened key database
ks	a KeySet which should contain changed keys, otherwise nothing is done
parentKey	Keys below `parentKey` will be set to `handle`. It is also used to add warnings and set error information.

Return values

1	on success
0	if nothing had to be done, no changes in KDB
-1	on failure, no changes in KDB, an error will be set on `parentKey` if possible (see "Errors" above)

Since: 1.0.0

See also: kdbOpen() for getting handle; kdbClose() that must be called afterwards; ksCurrent() contains the error Key

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Parameters

returned	the keyset where the keys will be in
keyname	the keyname below the names should be set

Exceptions

KDBException if there were problems with the database

The documentation for this class was generated from the following file:

kdb.hpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ KDB() [1/4]

◆ KDB() [2/4]

◆ KDB() [3/4]

◆ KDB() [4/4]

Member Function Documentation

◆ close() [1/2]

◆ close() [2/2]

◆ get() [1/2]

◆ get() [2/2]

◆ open() [1/2]

◆ open() [2/2]

◆ set() [1/2]

◆ set() [2/2]