Constructs a class KDB. More...

#include <kdb.hpp>

Inheritance diagram for kdb::KDB:

Public Member Functions
	KDB ()
	Constructs a class KDB. More...

	KDB (Key &errorKey)
	Constructs a class KDB. More...

	KDB (KeySet &contract)
	Constructs a class KDB. More...

	KDB (KeySet &contract, Key &errorKey)
	Constructs a class KDB. More...

virtual void	open (Key &errorKey)
	Open the database. More...

virtual void	open (KeySet &contract, Key &errorKey)
	Open the database. More...

virtual void	close () throw ()
	Close the database. More...

virtual void	close (Key &errorKey) throw ()
	Close the database. More...

virtual int	get (KeySet &returned, std::string const &keyname)
	Get all keys below keyname inside returned. More...

virtual int	get (KeySet &returned, Key &parentKey)
	Get all keys below parentKey inside returned. More...

virtual int	set (KeySet &returned, std::string const &keyname)
	Set all keys below keyname. More...

virtual int	set (KeySet &returned, Key &parentKey)
	Set all keys below parentKey. More...

virtual ElektraDiff	calculateChanges (KeySet &changedKeySet, std::string const &parentKeyName)
	Calculates the changes between the provided KeySet and the current state of the KDB. More...

virtual ElektraDiff	calculateChanges (KeySet &changedKeySet, Key &parentKey)
	Calculates the changes between the provided KeySet and the current state of the KDB. More...

ckdb::KDB *	getKdb () const
	Passes out the raw kdb pointer. More...

ckdb::KDB *	operator* () const
	Is an abbreviation for getKdb. More...

Detailed Description

Constructs a class KDB.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

Access to the key database.

Invariant: the object holds a valid connection to the key database or is empty

Constructor & Destructor Documentation

◆ KDB() [1/4]

kdb::KDB::KDB ( )

inline

Constructs a class KDB.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [2/4]

kdb::KDB::KDB ( Key & errorKey )

inlineexplicit

Constructs a class KDB.

Parameters

errorKey is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [3/4]

kdb::KDB::KDB ( KeySet & contract )

inlineexplicit

Constructs a class KDB.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ KDB() [4/4]

kdb::KDB::KDB	(	KeySet &	contract,
		Key &	errorKey
	)

inline

Constructs a class KDB.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Exceptions

KDBException if database could not be opened

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

Member Function Documentation

◆ calculateChanges() [1/2]

ElektraDiff kdb::KDB::calculateChanges	(	KeySet &	changedKeySet,
		Key &	parentKey
	)

inlinevirtual

Calculates the changes between the provided KeySet and the current state of the KDB.

Parameters

changedKeySet	the keyset that should be used to diff
parentKey	only changes same or below this keys are calculated

Returns: a diff with all the changes

◆ calculateChanges() [2/2]

ElektraDiff kdb::KDB::calculateChanges	(	KeySet &	changedKeySet,
		std::string const &	parentKeyName
	)

inlinevirtual

Calculates the changes between the provided KeySet and the current state of the KDB.

Parameters

changedKeySet	the keyset that should be used to diff
parentKeyName	only changes same or below this keys are calculated

Returns: a diff with all the changes

◆ close() [1/2]

void kdb::KDB::close	(	)
throw	(
	)

inlinevirtual

Close the database.

The return value does not matter because its only a null pointer check.

Closes the session with the Key database.

Precondition: The handle must be a valid handle as returned from kdbOpen(); errorKey must be a valid key, e.g. created with keyNew()

This is the counterpart of kdbOpen().

You must call this method when you are finished working with the Key database. You can manipulate Key and KeySet objects also after kdbClose(), but you must not use any kdb*() call afterwards.

The handle parameter will be finalized and all resources associated to it will be freed. After a kdbClose(), the handle cannot be used anymore.

Parameters

handle	contains internal information of opened key database
errorKey	the key which holds error/warning information

Return values

0	on success
-1	on NULL pointer

Since: 1.0.0

See also: kdbOpen() for opening a session with a Key database

◆ close() [2/2]

void kdb::KDB::close	(	Key &	errorKey	)
throw	(
	)

inlinevirtual

Close the database.

The return value does not matter because its only a null pointer check.

Parameters

errorKey is useful if you want to get the warnings

Closes the session with the Key database.

Precondition: The handle must be a valid handle as returned from kdbOpen(); errorKey must be a valid key, e.g. created with keyNew()

This is the counterpart of kdbOpen().

You must call this method when you are finished working with the Key database. You can manipulate Key and KeySet objects also after kdbClose(), but you must not use any kdb*() call afterwards.

The handle parameter will be finalized and all resources associated to it will be freed. After a kdbClose(), the handle cannot be used anymore.

Parameters

handle	contains internal information of opened key database
errorKey	the key which holds error/warning information

Return values

0	on success
-1	on NULL pointer

Since: 1.0.0

See also: kdbOpen() for opening a session with a Key database

◆ get() [1/2]

int kdb::KDB::get	(	KeySet &	returned,
		Key &	parentKey
	)

inlinevirtual

Get all keys below parentKey inside returned.

Retrieve Keys from the Key database in an atomic and universal way.

Precondition: The handle must be a valid KDB handle as returned from kdbOpen().; The KeySet returned must be a valid KeySet, i.e., constructed with ksNew().; The KeySet returned must contain keys only from the spec:/, dir:/, user:/, system:/, default:/ or proc:/ namespaces.; The Key parentKey must be a valid Key, i.e., constructed with keyNew().; The Key parentKey must not have read-only name, value or metadata.; The Key parentKey must use the spec:/, dir:/, user:/, system:/, default:/, proc:/ or cascading namespace.

If you pass NULL or a key with read-only metadata as parentKey, kdbGet() will fail immediately without doing anything. If you pass another invalid parentKey, or NULL as ks or handle, kdbGet() will set an error on parentKey and then return immediately.

Note: If you pass a non-NULL parentKey with writable metadata, kdbGet() will always remove any existing errors and warnings from parentKey.

Warning: If you later call kdbSet() with the same handle you must make sure to pass all keys from ks, which you do not want to remove.

Loadable Namespaces

Not all namespace can be loaded.

spec:/, dir:/, user:/ and system:/ can be loaded via kdbGet().
proc:/ keys can be loaded via kdbGet(), but are not persisted or cached.
default:/ keys can be inserted by kdbGet() but they will always stem from a specification in spec:/ keys.
If ks contains a key with any other namespace, an error will be returned.

Parent Key

The parentKey defines which parts of ks will be loaded. Everything that is at or below parentKey wil be loaded together with any key that shares a backend with such a key. Backends are always loaded as an atomic unit.

Note: If parentKey is in the cascading namespace, keys of all loadable namespaces (see above) will be loaded. This is generally the recommended approach.

Upon sucessfully returning kdbGet() also sets the value of parentKey to the storage identifier used by the backend that contains (or would contain) parentKey. For file-based backends this is the absolute path of the underlying file. Other backends may use different identifiers, but it always uniquely identifies the underlying storage unit.

Note: If parentKey is in the cascading, default:/ or `proc:/ namespace, the value of parentKey will be set to an empty string. This is done, because those namespaces are not persistable (see kdbSet()) and therfore have no storage identifier.

KeySet Modifications

Below or at parentKey, the KeySet ks will mostly contain keys loaded from backends. The only exception are proc:/ and spec:/ keys that were already present, before kdbGet() was called and do not overlap with an existing backend (for those namespaces). This can be used to provide a hard-coded fallback specifications and/or process-specific data.

Keys not below (or at) parentKey that were present when kdbGet() was called, may still be removed. For example, this could be because they overlap with a backend that also has keys below parentKey (backends are atomic units).

Example:: This example demonstrates the typical usecase within an application (without error handling).

 
#include <kdb.h>
#include <stdio.h>
 
int main (void)
{
        KeySet * myConfig = ksNew (0, KS_END);
 
        // for error handling see kdbget_error.c
 
        // clang-format off
Key * key = keyNew ("/sw/tests/myapp/#0/current/",  KEY_END);
KDB * handle = kdbOpen (NULL, key);
kdbGet (handle, myConfig, key);
Key * result = ksLookupByName (myConfig, "/sw/tests/myapp/#0/current/testkey1", 0);
        // clang-format on
 
        keyDel (key);
 
        const char * key_name = keyName (result);
        const char * key_value = keyString (result);
        const char * key_comment = keyString (keyGetMeta (result, "comment/#0"));
        printf ("key: %s value: %s comment: %s\n", key_name, key_value, key_comment);
 
        ksDel (myConfig); // delete the in-memory configuration
 
 
        // maybe you want kdbSet() myConfig here
 
        kdbClose (handle, 0); // no more affairs with the key database.
}

When a backend fails kdbGet() will return -1 with all error and warning information in the parentKey. The parameter returned will not be changed.

Optimization:: In the first run of kdbGet all requested (or more) Keys are retrieved. On subsequent calls only the Keys are retrieved where something was changed inside the Key database. The other Keys stay in the KeySet returned as passed.

It is your responsibility to save the original KeySet if you need it afterwards.

If you want to be sure to get a fresh KeySet again, you need to open a second handle to the Key database using kdbOpen().

Parameters

handle	contains internal information of opened key database
parentKey	Keys below `parentKey` will be retrieved from `handle`. It is also used to add warnings and set error information.
ks	the (pre-initialized) KeySet returned with all keys found will not be changed on error or if no update is required

Return values

2	if only `proc:/` backends were executed. This means no data was loaded from storage. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as errors!
1	if the Keys were retrieved successfully. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as errors!
0	if there was no update at all - no changes are made to the KeySet then. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as erorrs!
-1	on failure - no changes are made to the KeySet then

Since: 1.0.0

See also: ksLookup(), ksLookupByName() for powerful lookups after the KeySet was retrieved; kdbOpen() which needs to be called before; kdbSet() to save the configuration afterwards; kdbClose() to finish affairs with the Key database.

Parameters

returned	the keyset where the keys will be in
parentKey	the parentKey of returned

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Exceptions

KDBException if there were problems with the database

Reimplemented in kdb::tools::merging::MergingKDB.

◆ get() [2/2]

int kdb::KDB::get	(	KeySet &	returned,
		std::string const &	keyname
	)

inlinevirtual

Get all keys below keyname inside returned.

Retrieve Keys from the Key database in an atomic and universal way.

Precondition: The handle must be a valid KDB handle as returned from kdbOpen().; The KeySet returned must be a valid KeySet, i.e., constructed with ksNew().; The KeySet returned must contain keys only from the spec:/, dir:/, user:/, system:/, default:/ or proc:/ namespaces.; The Key parentKey must be a valid Key, i.e., constructed with keyNew().; The Key parentKey must not have read-only name, value or metadata.; The Key parentKey must use the spec:/, dir:/, user:/, system:/, default:/, proc:/ or cascading namespace.

If you pass NULL or a key with read-only metadata as parentKey, kdbGet() will fail immediately without doing anything. If you pass another invalid parentKey, or NULL as ks or handle, kdbGet() will set an error on parentKey and then return immediately.

Note: If you pass a non-NULL parentKey with writable metadata, kdbGet() will always remove any existing errors and warnings from parentKey.

Warning: If you later call kdbSet() with the same handle you must make sure to pass all keys from ks, which you do not want to remove.

Loadable Namespaces

Not all namespace can be loaded.

spec:/, dir:/, user:/ and system:/ can be loaded via kdbGet().
proc:/ keys can be loaded via kdbGet(), but are not persisted or cached.
default:/ keys can be inserted by kdbGet() but they will always stem from a specification in spec:/ keys.
If ks contains a key with any other namespace, an error will be returned.

Parent Key

The parentKey defines which parts of ks will be loaded. Everything that is at or below parentKey wil be loaded together with any key that shares a backend with such a key. Backends are always loaded as an atomic unit.

Note: If parentKey is in the cascading namespace, keys of all loadable namespaces (see above) will be loaded. This is generally the recommended approach.

Upon sucessfully returning kdbGet() also sets the value of parentKey to the storage identifier used by the backend that contains (or would contain) parentKey. For file-based backends this is the absolute path of the underlying file. Other backends may use different identifiers, but it always uniquely identifies the underlying storage unit.

Note: If parentKey is in the cascading, default:/ or `proc:/ namespace, the value of parentKey will be set to an empty string. This is done, because those namespaces are not persistable (see kdbSet()) and therfore have no storage identifier.

KeySet Modifications

Below or at parentKey, the KeySet ks will mostly contain keys loaded from backends. The only exception are proc:/ and spec:/ keys that were already present, before kdbGet() was called and do not overlap with an existing backend (for those namespaces). This can be used to provide a hard-coded fallback specifications and/or process-specific data.

Keys not below (or at) parentKey that were present when kdbGet() was called, may still be removed. For example, this could be because they overlap with a backend that also has keys below parentKey (backends are atomic units).

Example:: This example demonstrates the typical usecase within an application (without error handling).

 
#include <kdb.h>
#include <stdio.h>
 
int main (void)
{
        KeySet * myConfig = ksNew (0, KS_END);
 
        // for error handling see kdbget_error.c
 
        // clang-format off
Key * key = keyNew ("/sw/tests/myapp/#0/current/",  KEY_END);
KDB * handle = kdbOpen (NULL, key);
kdbGet (handle, myConfig, key);
Key * result = ksLookupByName (myConfig, "/sw/tests/myapp/#0/current/testkey1", 0);
        // clang-format on
 
        keyDel (key);
 
        const char * key_name = keyName (result);
        const char * key_value = keyString (result);
        const char * key_comment = keyString (keyGetMeta (result, "comment/#0"));
        printf ("key: %s value: %s comment: %s\n", key_name, key_value, key_comment);
 
        ksDel (myConfig); // delete the in-memory configuration
 
 
        // maybe you want kdbSet() myConfig here
 
        kdbClose (handle, 0); // no more affairs with the key database.
}

When a backend fails kdbGet() will return -1 with all error and warning information in the parentKey. The parameter returned will not be changed.

Optimization:: In the first run of kdbGet all requested (or more) Keys are retrieved. On subsequent calls only the Keys are retrieved where something was changed inside the Key database. The other Keys stay in the KeySet returned as passed.

It is your responsibility to save the original KeySet if you need it afterwards.

If you want to be sure to get a fresh KeySet again, you need to open a second handle to the Key database using kdbOpen().

Parameters

handle	contains internal information of opened key database
parentKey	Keys below `parentKey` will be retrieved from `handle`. It is also used to add warnings and set error information.
ks	the (pre-initialized) KeySet returned with all keys found will not be changed on error or if no update is required

Return values

2	if only `proc:/` backends were executed. This means no data was loaded from storage. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as errors!
1	if the Keys were retrieved successfully. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as errors!
0	if there was no update at all - no changes are made to the KeySet then. There might be warnings attached to the parentKey! Depending on your use case, you might need to treat them as erorrs!
-1	on failure - no changes are made to the KeySet then

Since: 1.0.0

See also: ksLookup(), ksLookupByName() for powerful lookups after the KeySet was retrieved; kdbOpen() which needs to be called before; kdbSet() to save the configuration afterwards; kdbClose() to finish affairs with the Key database.

 
#include <kdb.hpp>
 
#include <keyio.hpp>
 
using namespace kdb;
 
int main ()
{
        KeySet config;
        KDB kdb;
        kdb.get (config, "/sw/MyApp");
 
        Key k = config.lookup ("/sw/MyApp/mykey");
        if (k)
        {
                std::cout << k << " is " << k.get<int> () << std::endl;
        }
        else
        {
                std::cerr << "No key found" << std::endl;
                return 1;
        }
}

Parameters

returned	the keyset where the keys will be in
keyname	the root keyname which should be used to get keys below it

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Exceptions

KDBException if there were problems with the database

See also: KDB::get (KeySet & returned, Key & parentKey)

Reimplemented in kdb::tools::merging::MergingKDB.

◆ getKdb()

ckdb::KDB * kdb::KDB::getKdb ( ) const

inline

Passes out the raw kdb pointer.

This pointer can be used to directly interact with the underlying kdb instance

Note: that the ownership remains in the object

◆ open() [1/2]

void kdb::KDB::open ( Key & errorKey )

inlinevirtual

Open the database.

Parameters

errorKey is useful if you want to get the warnings in the successful case, when no exception is thrown.

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ open() [2/2]

void kdb::KDB::open	(	KeySet &	contract,
		Key &	errorKey
	)

inlinevirtual

Open the database.

Parameters

contract	the contract that should be ensured
errorKey	is useful if you want to get the warnings in the successful case, when no exception is thrown.

Opens the session with the Key database.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

You must always call this method before retrieving or committing any keys to the database. At the end of a program, after using the Key database (KDB), you must not forget to call kdbClose() to free resources.

The method will bootstrap itself in the following way. The first step is to open the default backend. With it system:/elektra/mountpoints will be loaded and all needed libraries and mountpoints will be determined. Then the global plugins and global keyset data from the contract is processed. Finally, the libraries for backends will be loaded and with it the KDB data structure will be initialized.

The pointer to the KDB structure returned will be initialized like described above, and it must be passed along on any kdb*() method your application calls.

Get a KDB handle for every thread using elektra. Don't share the handle across threads, and also not the pointer accessing it:

void thread1 (void)
{
        Key * parent = keyNew ("/app/part1", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}
void thread2 (void)
{
        Key * parent = keyNew ("/app/part2", KEY_END);
        KDB * h = kdbOpen (NULL, parent);
        // fetch keys and work with them
        kdbClose (h, parent);
}

You don't need kdbOpen() if you only want to manipulate plain in-memory Key or KeySet objects.

Precondition: errorKey must be a valid key, e.g. created with keyNew()

Parameters

contract	the contract that should be ensured before opening the KDB all data is copied and the KeySet can safely be used for e.g. kdbGet() later
errorKey	the key which holds errors and warnings which were issued

Returns: handle to the newly created KDB on success

Return values

NULL	on failure

Since: 1.0.0

See also: kdbClose() to close the session of a Key database opened by kdbOpen()

◆ operator*()

ckdb::KDB * kdb::KDB::operator* ( ) const

inline

Is an abbreviation for getKdb.

Passes out the raw kdb pointer. This pointer can be used to directly interact with the underlying kdb instance

Note: that the ownership remains in the object

See also: getKdb()

◆ set() [1/2]

int kdb::KDB::set	(	KeySet &	returned,
		Key &	parentKey
	)

inlinevirtual

Set all keys below parentKey.

If the keyname of the parentKey is invalid (e.g. empty) all keys will be set.

Set Keys to the Key database in an atomic and universal way.

Precondition

kdbGet() must be called before kdbSet():

initially (after kdbOpen())
after conflict errors in kdbSet().

The KeySet ks must be a valid KeySet, i.e., constructed with ksNew().

The KeySet ks must only contain only keys in the spec:/, dir:/, user:/, system:/, default:/ or proc:/ namespaces.

The Key parentKey must be a valid Key, e.g. constructed with keyNew().

The Key parentKey must not have read-only name, value or metadata.

The Key parentKey must use the spec:/, dir:/, user:/, system:/, default:/, proc:/ or cascading namespace.

If you pass NULL or a key with read-only metadata as parentKey, kdbSet() will fail immediately without doing anything. If you pass another invalid parentKey, or NULL as ks or handle, kdbSet() will set an error on parentKey and then return immediately.

Note: If you pass a non-NULL parentKey with writable metadata, kdbSet() will always remove any existing errors and warnings from parentKey.

Persistable Namespaces

Not all namespace can be persisted.

spec:/, dir:/, user:/ and system:/ will be persisted by kdbSet().
default:/ and proc:/ keys are ignored by kdbSet().
If ks contains a key with any other namespace, an error will be returned.

In general it is recommended to use a parentKey in the cascading namespace to cover all namespaces at once.

Parent Key

The parentKey defines which parts of ks will be stored. Everything that is at or below parentKey will be persisted together with any key that shares a backend with such a key. Backends are always stored as an atomic unit.

Note: If parentKey is in the cascading namespace, keys of all persistable namespaces (see above) will be stored. This is generally the recommended approach.

KeySet modifications

The contents of ks will mostly not be modified by kdbSet(). The only modifications made are those caused by applying the specification in spec:/ to dir:/, user:/ and system:/.

Errors

If parentKey == NULL or parentKey has read-only metadata, kdbSet() will immediately return the error code -1. In all other error cases the following happens:

Error information will be written into the metadata of the parent key, if possible.
None of the keys are actually committed in this situation, i.e. no configuration file will be modified.

In case of errors you should present the error message to the user and let the user decide what to do. Possible solutions are:

remove the problematic key and use kdbSet() again (for validation or type errors)
change the value of the problematic key and use kdbSet() again (for validation errors)
do a kdbGet() (for conflicts, i.e. error C02000) and then
- set the same keyset again (in favour of what was set by this user)
- drop the old keyset (in favour of what was set from another application)
- merge the original, your own and the other keyset
export the configuration into a file (for unresolvable errors)
repeating the same kdbSet() might be of limited use, if the user does not explicitly request it, because temporary errors are rare and its unlikely that they fix themselves (e.g. disc full, permission problems)

Optimization

Only backends that

contain at least one changed key according to elektraDiffCalculate(),
contain fewer keys than at the end of kdbGet() will be called. There won't be an unnecessary write for unchanged keys.

If none of the backends needs an update, kdbSet() returns 0 and does nothing.

KeySet * myConfig = ksNew (0, KS_END);
Key * parentKey = keyNew ("system:/sw/MyApp", KEY_END);
KDB * handle = kdbOpen (NULL, parentKey);
 
kdbGet (handle, myConfig, parentKey); // kdbGet needs to be called first!
KeySet * base = ksDup (myConfig);     // save a copy of original keyset
 
// change the keys within myConfig
ksAppendKey (myConfig, keyNew ("system:/sw/MyApp/Test", KEY_VALUE, "5", KEY_END));
 
KeySet * ours = ksDup (myConfig); // save a copy of our keyset
KeySet * theirs;                  // needed for 3-way merging
int ret = kdbSet (handle, myConfig, parentKey);
while (ret == -1) // as long as we have an error
{
        int strategy = showElektraErrorDialog (parentKey);
        theirs = ksDup (ours);
        kdbGet (handle, theirs, parentKey); // refresh key database
        KeySet * result = elektraMerge(
                ksCut(ours, parentKey), parentKey,
                ksCut(theirs, parentKey), parentKey,
                ksCut(base, parentKey), parentKey,
                parentKey, strategy, parentKey);
        int numberOfConflicts = elektraMergeGetConflicts (parentKey);
        ksDel (theirs);
        if (result != NULL) {
                ret = kdbSet (handle, result, parentKey);
        } else {
                // an error happened while merging
                if (numberOfConflicts > 0 && strategy == MERGE_STRATEGY_ABORT)
                {
                        // Error due to merge conflicts
                        ret = -1;
                }
                else
                {
                        // Internal errors, out of memory etc.
                        ret = -1;
                }
        }
}
 
 
ksDel (ours);
ksDel (base);
ksDel (myConfig); // delete the in-memory configuration
 
kdbClose (handle, parentKey); // no more affairs with the key database.
keyDel (parentKey);

showElektraErrorDialog() and doElektraMerge() need to be implemented by the user of Elektra. For doElektraMerge a 3-way merge algorithm exists in libelektra-tools.

Parameters

handle	contains internal information of opened key database
ks	a KeySet which should contain changed keys, otherwise nothing is done
parentKey	Keys below `parentKey` will be set to `handle`. It is also used to add warnings and set error information.

Return values

1	on success
0	if nothing had to be done, no changes in KDB
-1	on failure, no changes in KDB, an error will be set on `parentKey` if possible (see "Errors" above)

Since: 1.0.0

See also: kdbOpen() for getting handle; kdbClose() that must be called afterwards; ksCurrent() contains the error Key

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Parameters

returned	the keyset where the keys are passed to the user
parentKey	the parentKey of returned

Exceptions

KDBException if there were problems with the database

◆ set() [2/2]

int kdb::KDB::set	(	KeySet &	returned,
		std::string const &	keyname
	)

inlinevirtual

Set all keys below keyname.

If the keyname of the parentKey is invalid (e.g. empty) all keys will be set.

Set Keys to the Key database in an atomic and universal way.

Precondition

kdbGet() must be called before kdbSet():

initially (after kdbOpen())
after conflict errors in kdbSet().

The KeySet ks must be a valid KeySet, i.e., constructed with ksNew().

The KeySet ks must only contain only keys in the spec:/, dir:/, user:/, system:/, default:/ or proc:/ namespaces.

The Key parentKey must be a valid Key, e.g. constructed with keyNew().

The Key parentKey must not have read-only name, value or metadata.

The Key parentKey must use the spec:/, dir:/, user:/, system:/, default:/, proc:/ or cascading namespace.

If you pass NULL or a key with read-only metadata as parentKey, kdbSet() will fail immediately without doing anything. If you pass another invalid parentKey, or NULL as ks or handle, kdbSet() will set an error on parentKey and then return immediately.

Note: If you pass a non-NULL parentKey with writable metadata, kdbSet() will always remove any existing errors and warnings from parentKey.

Persistable Namespaces

Not all namespace can be persisted.

spec:/, dir:/, user:/ and system:/ will be persisted by kdbSet().
default:/ and proc:/ keys are ignored by kdbSet().
If ks contains a key with any other namespace, an error will be returned.

In general it is recommended to use a parentKey in the cascading namespace to cover all namespaces at once.

Parent Key

The parentKey defines which parts of ks will be stored. Everything that is at or below parentKey will be persisted together with any key that shares a backend with such a key. Backends are always stored as an atomic unit.

Note: If parentKey is in the cascading namespace, keys of all persistable namespaces (see above) will be stored. This is generally the recommended approach.

KeySet modifications

The contents of ks will mostly not be modified by kdbSet(). The only modifications made are those caused by applying the specification in spec:/ to dir:/, user:/ and system:/.

Errors

If parentKey == NULL or parentKey has read-only metadata, kdbSet() will immediately return the error code -1. In all other error cases the following happens:

Error information will be written into the metadata of the parent key, if possible.
None of the keys are actually committed in this situation, i.e. no configuration file will be modified.

In case of errors you should present the error message to the user and let the user decide what to do. Possible solutions are:

remove the problematic key and use kdbSet() again (for validation or type errors)
change the value of the problematic key and use kdbSet() again (for validation errors)
do a kdbGet() (for conflicts, i.e. error C02000) and then
- set the same keyset again (in favour of what was set by this user)
- drop the old keyset (in favour of what was set from another application)
- merge the original, your own and the other keyset
export the configuration into a file (for unresolvable errors)
repeating the same kdbSet() might be of limited use, if the user does not explicitly request it, because temporary errors are rare and its unlikely that they fix themselves (e.g. disc full, permission problems)

Optimization

Only backends that

contain at least one changed key according to elektraDiffCalculate(),
contain fewer keys than at the end of kdbGet() will be called. There won't be an unnecessary write for unchanged keys.

If none of the backends needs an update, kdbSet() returns 0 and does nothing.

KeySet * myConfig = ksNew (0, KS_END);
Key * parentKey = keyNew ("system:/sw/MyApp", KEY_END);
KDB * handle = kdbOpen (NULL, parentKey);
 
kdbGet (handle, myConfig, parentKey); // kdbGet needs to be called first!
KeySet * base = ksDup (myConfig);     // save a copy of original keyset
 
// change the keys within myConfig
ksAppendKey (myConfig, keyNew ("system:/sw/MyApp/Test", KEY_VALUE, "5", KEY_END));
 
KeySet * ours = ksDup (myConfig); // save a copy of our keyset
KeySet * theirs;                  // needed for 3-way merging
int ret = kdbSet (handle, myConfig, parentKey);
while (ret == -1) // as long as we have an error
{
        int strategy = showElektraErrorDialog (parentKey);
        theirs = ksDup (ours);
        kdbGet (handle, theirs, parentKey); // refresh key database
        KeySet * result = elektraMerge(
                ksCut(ours, parentKey), parentKey,
                ksCut(theirs, parentKey), parentKey,
                ksCut(base, parentKey), parentKey,
                parentKey, strategy, parentKey);
        int numberOfConflicts = elektraMergeGetConflicts (parentKey);
        ksDel (theirs);
        if (result != NULL) {
                ret = kdbSet (handle, result, parentKey);
        } else {
                // an error happened while merging
                if (numberOfConflicts > 0 && strategy == MERGE_STRATEGY_ABORT)
                {
                        // Error due to merge conflicts
                        ret = -1;
                }
                else
                {
                        // Internal errors, out of memory etc.
                        ret = -1;
                }
        }
}
 
 
ksDel (ours);
ksDel (base);
ksDel (myConfig); // delete the in-memory configuration
 
kdbClose (handle, parentKey); // no more affairs with the key database.
keyDel (parentKey);

showElektraErrorDialog() and doElektraMerge() need to be implemented by the user of Elektra. For doElektraMerge a 3-way merge algorithm exists in libelektra-tools.

Parameters

handle	contains internal information of opened key database
ks	a KeySet which should contain changed keys, otherwise nothing is done
parentKey	Keys below `parentKey` will be set to `handle`. It is also used to add warnings and set error information.

Return values

1	on success
0	if nothing had to be done, no changes in KDB
-1	on failure, no changes in KDB, an error will be set on `parentKey` if possible (see "Errors" above)

Since: 1.0.0

See also: kdbOpen() for getting handle; kdbClose() that must be called afterwards; ksCurrent() contains the error Key

Return values

0	if no key was updated
1	if user or system keys were updated
2	if user and system keys were updated

Parameters

returned	the keyset where the keys will be in
keyname	the keyname below the names should be set

Exceptions

KDBException if there were problems with the database

The documentation for this class was generated from the following file:

kdb.hpp

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ KDB() [1/4]

◆ KDB() [2/4]

◆ KDB() [3/4]

◆ KDB() [4/4]

Member Function Documentation

◆ calculateChanges() [1/2]

◆ calculateChanges() [2/2]

◆ close() [1/2]

◆ close() [2/2]

◆ get() [1/2]

◆ get() [2/2]

◆ getKdb()

◆ open() [1/2]

◆ open() [2/2]

◆ operator*()

◆ set() [1/2]

◆ set() [2/2]